Electronic Systems Group

February 21,2020: I began working on my Traffic Light Project.

March 12, 2020: Conner Richter has completed his project. I successfully demonstrated all aspects of the exam to Professor Jagodowski. I submitted the hardcopy and emailed the required zipper files.

Conner Richter has completed this assignment.

Conner Richter has completed this lab. Both Conner's worked together for lab.
Picture 1 => Activity 1
Picture 2 => Activity 2
Picture 3 => Activity 3
Picture 4 => Activity 4
Picture 5 => Activity 5

Conner Richter has done inventory for Lab.

Conner Richter has completed this lab

Week 6 was a wiring week. After getting the stepper motor and conveyer belt running separately. We had to get them both to run off one PLC program together. So on Tuesday 2/25/20, we wired the PLC up to the stepper motor, conveyer belt, and the emergency stop. And got all of them to work together. O...

During this week our group focused on getting the stepper motors programing to run. We did it both using a PLC and an ardunio. After getting both to work we decided on the ardunio because it used less inputs on the PLC. Since we didn't have a full week we did not get much hardware done.

Conner Richter has completed this lab.
Picture 1 => Part 1
Picture 2 => Part 6

Conner Richter has completed this lab.
Picture 1 => BS2 HIGH/LOW/PAUSE
Picture 2 => 40HZ, 25% D.C.
Picture 3 => PULSOUT
Picture 4 => 850 PULSOUT
Picture 5 => PULSIN
Picture 6 => RCTIME
Picture 7 => FREQOUT

During this week we focused on getting the plc connected with the stepper motor. We got the stepper motor to run on the PLC finally, but it uses up lots of spaces on the PLC. So on Friday of this week me and H tried to get the stepper motor controller to work with the plc. We achieved to get it to r...

Conner Richter has completed this lab.
Picture 1 => 1.25V
Picture 2 => 2.5V
Picture 3 => 3.75V
Picture 4 => 4.958V

Conner Richter has completed Chapter 5 & 6. There are four photos attached. The two with compactors in them are chapter 5 assignments. The other two assignments with 8 segment displays are from chapter 6.

Conner Richter has completed all of chapter 4 and started chapter 5.

Conner Richter has completed the chapter Three of micro controller.

Conner Richter Week 3 2/3/20 - 2/7/20 During week three of our project we started on our second step. The second step of our project was to start the PLC connection. While in step two of the design we split up into two groups. One group was designated on getting the PLC to connect to the PC. The oth...

Conner Richter has completed the Differentiators & Integrators lab.
Picture 1 => signature of completion
Picture 2 => part 2, 1.5kHz
Picture 3 => part 2, 600Hz

Conner Richter has completed the assigned reading. The two links "Who is Tim Woods and Why is he killing your business?" and "The 8 Deadly Lean Wastes - DOWNTIME" talk about the strategies of using 6 sigma notation in a manufacturing environment. Way that businesses can save mone...

Conner Richter Week 2 1/28/20 - 1/30/20 During week two of the bottle filling project we have accomplished great bounds. On Tuesday 1/28/20 we decided on a basic design and layout. We built a rough design based off the ideas we started with. We also selected the name of the group, The Bottle guys. A...

Conner Richter has completed the Op-Amp circuits Lab.

During the fist week of the project we split up into groups and selected our topics. After getting into our groups we started to pick ideas for a basic design. On Friday 1/24/20, We started to take apart old projects. This was to get parts for use in our project. I started take down around 8 am and ...