Electronic Systems Group

messed with the ramp a little more as well as discuss with the group more on what to do for our stepper motors and new placements for the ramps

I was able to get the ramps togethor and mounting and and placing the stepper motor for the ramp and on the placements for them in the final project as well and mess with some 3D prints with Vlad for the stepper motor and redesigning our boxes as we can to a little issue

i readjusted the size of our ramps also talked with Vlad about how we should 3d print sleeve for the stepper motor while also talking with joe and Greyyton on the PLC and shifting the programming to another plc

I ask Ruvim to cut some more blocks for me and was able to finish with the ramp edges making a lil adjustments to make sure the box still does as function and was testing where to place the stepper motor as well

i started adding ramp barriers to the ramp as well as talking with Vlad to making a block for the stepper and adjust the height if needed as well as the squeeze fit to the stepper motor

i ask Ruvim to adjust side for ramp and i start adding extra touches to the ramp and making sure we can get it to flow correctly as well as talk with vlad about the stepper motor and placement

This week, Greyyton, Joe and i continued with the PLC. Ask Vlad to make some 3d prints.

we made more progress on the plc with Greyton and Joe. I also talked with Vlad about our idea for the ramp height.

Joe and I work on finishing and touching up the programming while Vlad worked with the stepper motors, Jake finished up putting the sensors into the hopper and Ruvim did some more woodwork.

Rodrigo

i have finish chatper 7 and 8

i have completed chapter 5-6

we started to examine our 3D parts and make sure we know it would work or had to make adjustments, we did get more into detail with PLC with Joe and Greyton. Also mess with the wires and work on hooking up the reflective sensor to make sure it work as we intended and found a minor flaw.

We discuss on our big major plans and tools we'll need as well as started to look into the PLC with Greyton and Joe left mid way since I wasn't there on Thursday

We made a timeline of the project by weeks, worked together to discuss an overall plan and the components we needed for the project

Rodrigo Espinoza week #3

I'm currently between chapter 5 stuck at the moment on page 158

I completed chapter 1-4

Week 1 555 Clock timer & Clock Pulse

finished the wisc links, and completed the reading