Electronic Systems Group

Completed lab wk 7

I completed

completed , This weeks lab never posted

This week we did a lot of adjustment we went over the plc's we planned on focusing on wiring the motors and the combinations of sensors to the plc's discussed on programing the robot EXCITING!!

chris wired switched we drilled the the translation machine some extra wood to add it friction we also finished wiring the plc's we did more planing soldering and organizing the set up we disused parts we planned on ordering and how to reduce more noise and vibration.

chris and i discussed showing up for spring break, and re wiring and how the plc's looking , and he also wnts me to help out with the robots programing. he wired all the sensors on the 9 combinations of blocks with 2 input although we will be using one .

Took a look at the project and had a few discussions, everyone was working on the traffic light so not much got done, but maybe some time off isnt that bad off an idea!!

Monday schedual

We adjusted the translation table and reduced the vibration that comes from it. We discused more adjustments we can make to it in the future and colors we can paint the wood.and how we can and will control the voltage out of the plc's.

This week, We looked over the wiring and plc's to make sure everything was connected in the right ports, and that things would be running smoothly also began planning to adjust translation table.

Completed!!!

2-27-19 Spent a short period of time working on the lab, long hours quick trouble shooting helped by classmates.

3-1-19 Presented last day, 11am and submitted electronic and paper copies of all of my work.

2-27-19 Spent a short period of time working on the lab, long hours quick trouble shooting helped by classmates.

3-1-19 Presented last day, 11am and submitted electronic and paper copies of all of my work.

completed !

Completed!

Completed didn't know we had to post on forums.

Completed !

Tuesday: 2/5/19 -(( short day snow day))Made our plan and figured out schedule for what each person needs to be working on, and how the plc 's flowchart should look with the help of chuck. 2/7/19; Made new congruent square base and new brick with three wholes for the table the robot will be sitting ...

Finished this weeks lab

Tuesday: 1/29/19 We moved our project toa few new table until we found the right one. We could not communicate with the plcso were going to wait for chuck he was out sick, but we took part moved them around and discussed what we would due in further dates. Thursday: 1/31/19 we angled things differen...

I have completed the lab for this week!