This week you should be working on the content in Chapter 6 in the Parallax Process Control text. A pdf of Chapter 6 is attached here for your convenience:
The incubator circuit you will build today will be used for the remaining exercises in the text. Here are the schematics and layout for the circuits:
It is recommended that you construct it on a protoboard you will not need for the rest of the semester. You can build it directly on your BoeBot board OR you can build it on a small separate protoboard. See your instructor for an additional protoboard if that is your preference.
You should post your screendshot of the Stampplot Graph created with the
IncubatorOpenLoop.bs2 program and the StampPlot macro
sic_pc_incubator_open_loop.spm. Your graph should look similar to the graph of Fig. 6-23 on page 216:
- Fig. 6-23 Stampplot Open-Loop Control.jpg (301.28 KiB) Viewed 4940 times