Week #2: (2/1-5) Ch. 3, 4 & 5 in WAM text.

Post Reply
rjagodowski
Posts: 1561
Joined: Fri Sep 04, 2015 6:59 pm

Week #2: (2/1-5) Ch. 3, 4 & 5 in WAM text.

Post by rjagodowski »

We'll start today's lecture off with a quick review of LEDs and Switches from Chapters 2 & 3 in the WAM text (attached below). Make special note of the bi-color LEDs, as the BoeBot kit did not include these.

Then we will discuss the operation of the Standard Servo Motor. A pdf of the Ch. 4 PowerPoint presentation is attached below.

As in the previous chapters, make sure you answer the questions/problems at the end of the chapter.


Parallax has 3 small PWM controlled servo motors designed to be used with the Board of Education and other similar micro-controllers. They are the standard servo (180* rotation), continuous rotation servo and the high-speed continuous rotation servo. Their data sheets are attached here:
900-00025-High-Speed-CR-Servo-Guide-v1.0.pdf
(135.26 KiB) Downloaded 55 times
There are also various motor controllers available, such as the HB-25 from Parallax. The User Guide & Data sheet are attached:
HB-25-Motor-Controller-Guide-v1.3.pdf
(728.5 KiB) Downloaded 58 times
If you have any questions about this chapter, either post them as a reply in the proper week of the semester for this course, or ask them at the beginning of next week's lecture.
Attachments
wam_ch4_Servo Motor.pdf
(738.51 KiB) Downloaded 76 times
wam_ch3_LEDs&Switches.pdf
(740.35 KiB) Downloaded 88 times
WAM_Ch. 5.pdf
(1.43 MiB) Downloaded 42 times

Post Reply

Return to “EET-260 Lecture”