Week #11: (4/4-8) Stampworks - Stepper Motor Control

Post Reply
rjagodowski
Posts: 2370
Joined: Fri Sep 04, 2015 6:59 pm

Week #11: (4/4-8) Stampworks - Stepper Motor Control

Post by rjagodowski »

This lab you will use the Stampworks kits to learn to control a stepper motor.

This experiment requires the connection of a potentiometer from Experiment #26 (page 146) in the Stampworks text. Make sure you connect that or your circuit will not work.

[attachment=1]Exp. 26 Potentiometer Circuit.jpg[/attachment]

When you have completed this experiment, put a post in the form of a Reply to this thread.


A reminder that you will be using the more advanced StampWorks kit with the Professional Development BS2 boards. These units are more expensive than the BoEBot boards. Double check your work ALWAYS!!!

The experiment used today has been taken from the Parallax StampWorks Manual. You can download the complete StampWorks Manual here in Week #10 Lab area.

The lab is attached here:
Stepper Motor Lab - StampWorks_v16.1.pdf
(176.87 KiB) Downloaded 154 times
Printed copies will be provided for you in lab.

The Data Sheet for the L293 stepper motor controller chip is attached here:
L293D_Datasheet_Full.pdf
(204.44 KiB) Downloaded 177 times
Limited printed copies of this are available for your use in the lab.

Here's a handout on Stepper Motor Operation:
SKC_stepper_operation.pdf
(773.34 KiB) Downloaded 158 times
Attachments
27964-Stepper-Motor-Manufacturers-Spec.pdf
(85.59 KiB) Downloaded 205 times
27964-Stepper-Motor-Documentation.pdf
(1.01 MiB) Downloaded 160 times
Exp. 26 Potentiometer Circuit.jpg
Exp. 26 Potentiometer Circuit.jpg (17.68 KiB) Viewed 4265 times
ljbaker0001

Re: Week #11: (4/4-8) Stampworks - Stepper Motor Control

Post by ljbaker0001 »

Week #11 Stepper motor control assignment completed
Last edited by ljbaker0001 on Mon Apr 11, 2016 10:44 am, edited 1 time in total.
crbrooks-bouchar0001

Re: Week #11: (4/4-8) Stampworks - Stepper Motor Control

Post by crbrooks-bouchar0001 »

Week 11 Stepper Motor complete
tddejesus

Re: Week #11: (4/4-8) Stampworks - Stepper Motor Control

Post by tddejesus »

Thomas DeJesus week #11, stepper motor lab complete.
wgonzalez7074

Re: Week #11: (4/4-8) Stampworks - Stepper Motor Control

Post by wgonzalez7074 »

Week#11: "Stepper Motor Control" have been a completed.
ybespalov09

Re: Week #11: (4/4-8) Stampworks - Stepper Motor Control

Post by ybespalov09 »

Lab: Stampworks-Stepper Motor Control is complete.
vlevchyk

Re: Week #11: (4/4-8) Stampworks - Stepper Motor Control

Post by vlevchyk »

LAB week 11 Is completed
btenerowicz1

Re: Week #11: (4/4-8) Stampworks - Stepper Motor Control

Post by btenerowicz1 »

lab completed 5/7
mjhowe0001

Re: Week #11: (4/4-8) Stampworks - Stepper Motor Control

Post by mjhowe0001 »

Stepper motor project complete
Post Reply

Return to “EET-260 Lab”