Final Project Information

Post Reply
erodowicz

Final Project Information

Post by erodowicz »

Here is a majority of the information that will be needed for the final project paper, etc.
Much of it contains the data and specifications of the various components to the filtration system and should be useful specifically for referencing all the technical info including specific schematics and diagrams that will be included in the paper.

Regarding the actual centrifuge information, a bit more searching is needed for exact schematics, but should be available possibly by Monday. The two main sites seem to be rather limited in terms of exact documentation:

UtahBiodiesel (supplier) http://www.utahbiodieselsupply.com/centrifugewvo.php
WVO Designs (manufacturer) http://www.wvodesigns.com/

Documentation for the Allen-Bradley components:

PLC PLC Power Supply PLC Modules PLC Touch Screen
erodowicz

Re: Final Project Information

Post by erodowicz »

VFD

Documentation for WVO Centrifuge and Solenod Valve:

Centrifuge
WVO Centrifuge Parts (Basic Info).docx
(570.88 KiB) Downloaded 66 times
Heater - Specific Heater Part number is TST-101-101 Solenoid Valve This is the documentation on-hand, but may need to be verified since image seems different than the actual piece and much of its labeling was in Chinese (or something similar)
Solenoid Valve - Brass 0.5 inch NPS-Threaded.pdf
(486.88 KiB) Downloaded 60 times
erodowicz

Re: Final Project Information

Post by erodowicz »

Documentation for Sensors:

Flowmeter Basic Stamp Homework Board
Level Sensor Temperature Sensor
Temp Sensor - [Parallax] DS1620 (Data Sheet).PDF
(79.02 KiB) Downloaded 66 times
LCD display for Temperature Sensor
Post Reply

Return to “Team Fluid Processing - Day”