Week #12: (4/9-13) Stampworks Week #4
Posted: Sat Apr 07, 2018 10:47 am
If you are on schedule, you should be completing the experiments below this week. You should create a post which lists which experiments you completed under each corresponding week. . If you've completed all of these exercises, then please jump to Week #13.
You MUST demonstrate at least one of your completed experiments to your instructor each time you are in the lab or you will not receive credit for your posts. I will then verify your post with an edit added to your post with a statement similar to "Verified 4/5/18 by RJ"
Stampworks lab information and assignments were originally posted Here in Week #6.
The assignments have been copied again below for your convenience:
The Stampworks Manual can be downloaded here in the Course Syllabus and Documents Topic.
You will notice that the list below begins with Experiments #26 & #27, then back to Experiment #10. It is advised you perform these Experiments in this order.
The required experiments in the StampWorks Manual are:
Experiment #26: Hobby Servo Motor Control
Experiment #27: Stepper Motor Control
Experiment #10: A Digital Clock
Experiments #11, 12 & 13: Using an LCD Display
Experiment #14: Scanning & Debouncing Multiple Inputs
Experiment #16: Frequency Measurement
Experiment #17: Advanced Frequency Measurement
Experiment #18: A Light Controlled Theremin
Experiment #21: Analog Input with PULSIN
Experiment #22: Analog Output with PWM
Experiment #31: Advanced 7-Segment Multiplexing*
Experiment #32: IC2 Communications*
Experiment #33: Using A Real-Time Clock
*These Experiments require external parts not contained within the StampWorks Board Inventory. See your instructor for these components.
You MUST demonstrate at least one of your completed experiments to your instructor each time you are in the lab or you will not receive credit for your posts. I will then verify your post with an edit added to your post with a statement similar to "Verified 4/5/18 by RJ"
Stampworks lab information and assignments were originally posted Here in Week #6.
The assignments have been copied again below for your convenience:
The Stampworks Manual can be downloaded here in the Course Syllabus and Documents Topic.
You will notice that the list below begins with Experiments #26 & #27, then back to Experiment #10. It is advised you perform these Experiments in this order.
The required experiments in the StampWorks Manual are:
Experiment #26: Hobby Servo Motor Control
Experiment #27: Stepper Motor Control
Experiment #10: A Digital Clock
Experiments #11, 12 & 13: Using an LCD Display
Experiment #14: Scanning & Debouncing Multiple Inputs
Experiment #16: Frequency Measurement
Experiment #17: Advanced Frequency Measurement
Experiment #18: A Light Controlled Theremin
Experiment #21: Analog Input with PULSIN
Experiment #22: Analog Output with PWM
Experiment #31: Advanced 7-Segment Multiplexing*
Experiment #32: IC2 Communications*
Experiment #33: Using A Real-Time Clock
*These Experiments require external parts not contained within the StampWorks Board Inventory. See your instructor for these components.