Week #10: (3/26-3/30) Process Control, Chapter 5

Locked
rjagodowski
Posts: 2370
Joined: Fri Sep 04, 2015 6:59 pm

Week #10: (3/26-3/30) Process Control, Chapter 5

Post by rjagodowski »

This week you should complete all of the exercises in Chapter 5 of the Parallax Process Control text.

There will be designated computers in the lab which will have StampPlot loaded on them. Please do NOT shut these computers off.

You should take a screen shot of each unique StampPlot screen and post them in the form of a reply to this Topic.

(NOTE: For those running StampPlot on your own computer, there apparently has been some success installing StampPlot in Windows 10. However, you must set the Compatibility to "Win XP SP3" and set to "Run as Administrator". Then, click on the Desktop Icon to launch the program. After the program loads, then go to the "Macro" pull down menu and select the proper Macro to run. If you just click on the Macro open and run StampPlot, then there seems to be a problem with the compatibility. )

Make sure you put your Process Control Parts Kit back in the designated box when you are through.
npgrenier0001
Posts: 56
Joined: Thu Sep 21, 2017 11:59 am

Re: Week #10: (3/26-3/30) Process Control, Chapter 5

Post by npgrenier0001 »

Nathan Grenier & Fernando Rosado
Chapter5.1.jpg
Chapter5.1.jpg (125.62 KiB) Viewed 2118 times
flrosado0001
Posts: 61
Joined: Tue Sep 12, 2017 11:37 am

Re: Week #10: (3/26-3/30) Process Control, Chapter 5

Post by flrosado0001 »

Fernando Rosado, Nate G.
Attachments
Chapter5.1.jpg
Chapter5.1.jpg (125.62 KiB) Viewed 2118 times
Locked

Return to “EET-250 Lab”