Week #4: (2/12-16) Progress Reports

This is where you should post your weekly progress reports. Posts should be individual for each member of each group. You should post at least once per week. You may find it convenient to post more than one per week. That is acceptable.
Locked
rjagodowski
Posts: 2368
Joined: Fri Sep 04, 2015 6:59 pm

Week #4: (2/12-16) Progress Reports

Post by rjagodowski »

Please post your Week #4 Progress reports as a reply to this topic.
flrosado0001
Posts: 61
Joined: Tue Sep 12, 2017 11:37 am

Re: Week #4: (2/12-16) Progress Reports

Post by flrosado0001 »

Worked on wiring the elevators hoist motor with the 24v relays. It moved CW then CCW perfectly. Then connected to the plc/hmi and it worked perfectly too.

Fernando
Attachments
4182BDA0-78CF-4889-AE3A-B0DC956BE3B5.jpeg
4182BDA0-78CF-4889-AE3A-B0DC956BE3B5.jpeg (1.51 MiB) Viewed 3811 times
npgrenier0001
Posts: 56
Joined: Thu Sep 21, 2017 11:59 am

Re: Week #4: (2/12-16) Progress Reports

Post by npgrenier0001 »

Wired the elevator motor, to get the CW and CCW directions, then connected the plc to get the CW and CCW directions
ajjanczulewicz0001
Posts: 48
Joined: Tue Sep 13, 2016 2:49 pm

Re: Week #4: (2/12-16) Progress Reports

Post by ajjanczulewicz0001 »

helped sautering a possible door mechanism by using a stepper motor... deciding on materials for frame
mhau
Posts: 42
Joined: Tue Sep 13, 2016 2:39 pm

Re: Week #4: (2/12-16) Progress Reports

Post by mhau »

Worked on car design and edited a couple settings. Researched door mechanics.
asingh0001
Posts: 55
Joined: Wed Oct 05, 2016 10:16 am

Re: Week #4: (2/12-16) Progress Reports

Post by asingh0001 »

Collaborated the sensor and motor with the help of PLC for cheese grater station.
Amrit
jmllabaly0001
Posts: 45
Joined: Tue Sep 13, 2016 2:41 pm

Re: Week #4: (2/12-16) Progress Reports

Post by jmllabaly0001 »

finished working on the plc up/down program and found the supplies needed for the structure.
Attachments
IMG_5710.JPG
IMG_5710.JPG (1.37 MiB) Viewed 3790 times
JoseL.
mafitzgerald0001
Posts: 26
Joined: Thu Oct 27, 2016 2:34 pm

Re: Week #4: (2/12-16) Progress Reports

Post by mafitzgerald0001 »

Took CD drive apart, soldered leads to motor for use on the elevator door
Locked

Return to “Weekly Progress Reports - Post Weekly Progress Reports here.”