Page 1 of 1
Week #4: (2/12-16) Progress Reports
Posted: Tue Feb 13, 2018 10:36 am
by rjagodowski
Please post your Week #4 Progress reports as a reply to this topic.
Re: Week #4: (2/12-16) Progress Reports
Posted: Sun Feb 18, 2018 2:03 pm
by flrosado0001
Worked on wiring the elevators hoist motor with the 24v relays. It moved CW then CCW perfectly. Then connected to the plc/hmi and it worked perfectly too.
Fernando
Re: Week #4: (2/12-16) Progress Reports
Posted: Tue Feb 27, 2018 10:18 am
by npgrenier0001
Wired the elevator motor, to get the CW and CCW directions, then connected the plc to get the CW and CCW directions
Re: Week #4: (2/12-16) Progress Reports
Posted: Tue Feb 27, 2018 10:21 am
by ajjanczulewicz0001
helped sautering a possible door mechanism by using a stepper motor... deciding on materials for frame
Re: Week #4: (2/12-16) Progress Reports
Posted: Tue Feb 27, 2018 10:21 am
by mhau
Worked on car design and edited a couple settings. Researched door mechanics.
Re: Week #4: (2/12-16) Progress Reports
Posted: Mon Mar 05, 2018 5:23 pm
by asingh0001
Collaborated the sensor and motor with the help of PLC for cheese grater station.
Amrit
Re: Week #4: (2/12-16) Progress Reports
Posted: Sat Mar 10, 2018 1:53 am
by jmllabaly0001
finished working on the plc up/down program and found the supplies needed for the structure.
Re: Week #4: (2/12-16) Progress Reports
Posted: Thu Mar 22, 2018 8:30 am
by mafitzgerald0001
Took CD drive apart, soldered leads to motor for use on the elevator door