Week #4: (2/12-16) Progress Reports
-
- Posts: 2383
- Joined: Fri Sep 04, 2015 6:59 pm
Week #4: (2/12-16) Progress Reports
Please post your Week #4 Progress reports as a reply to this topic.
-
- Posts: 61
- Joined: Tue Sep 12, 2017 11:37 am
Re: Week #4: (2/12-16) Progress Reports
Worked on wiring the elevators hoist motor with the 24v relays. It moved CW then CCW perfectly. Then connected to the plc/hmi and it worked perfectly too.
Fernando
Fernando
- Attachments
-
- 4182BDA0-78CF-4889-AE3A-B0DC956BE3B5.jpeg (1.51 MiB) Viewed 3869 times
-
- Posts: 56
- Joined: Thu Sep 21, 2017 11:59 am
Re: Week #4: (2/12-16) Progress Reports
Wired the elevator motor, to get the CW and CCW directions, then connected the plc to get the CW and CCW directions
-
- Posts: 48
- Joined: Tue Sep 13, 2016 2:49 pm
Re: Week #4: (2/12-16) Progress Reports
helped sautering a possible door mechanism by using a stepper motor... deciding on materials for frame
Re: Week #4: (2/12-16) Progress Reports
Worked on car design and edited a couple settings. Researched door mechanics.
-
- Posts: 55
- Joined: Wed Oct 05, 2016 10:16 am
Re: Week #4: (2/12-16) Progress Reports
Collaborated the sensor and motor with the help of PLC for cheese grater station.
Amrit
Amrit
-
- Posts: 45
- Joined: Tue Sep 13, 2016 2:41 pm
Re: Week #4: (2/12-16) Progress Reports
finished working on the plc up/down program and found the supplies needed for the structure.
- Attachments
-
- IMG_5710.JPG (1.37 MiB) Viewed 3848 times
JoseL.
-
- Posts: 26
- Joined: Thu Oct 27, 2016 2:34 pm
Re: Week #4: (2/12-16) Progress Reports
Took CD drive apart, soldered leads to motor for use on the elevator door