Week #9: (3/18-22) StampWorks Experiments #2.

Post Reply
rjagodowski
Posts: 1246
Joined: Fri Sep 04, 2015 6:59 pm

Week #9: (3/18-22) StampWorks Experiments #2.

Post by rjagodowski » Sun Mar 17, 2019 6:23 pm

This week you will begin your work in the StampWorks Manual. The complete list of experiments to be performed in this manual is at the end of this post. You can download the StampWorks Manual as well as the Spec Sheet for the Professional Development Board at here.


You MUST demonstrate at least one of your completed experiments to your instructor each time you are in the lab or you will not receive credit for your posts. I will then verify your post with an edit added to your post with a statement similar to "Verified 4/5/18 by RJ"



The BS2 Program code for all of the StampWorks Experiments are contained in this zip file:
27297-StampWorks-Source-v2.1.zip
(75.1 KiB) Downloaded 8 times
For this week, you should complete at least Experiments #26, #27, #10 & #11 and post a Reply to this Topic stating as such. If you have time, you should continue working through the list. There will be additional experiments, as noted on the list.

The BS2 Professional Development Board was created to allow one to rapidly create and experiment with BS2 projects using a minimum of external hardware. There is a large prototyping area contained on the board, but you will find that many of the traditional I/O devices are included already. For instance: Pushbutton Switches, slide switches, LEDs, 7-Segment LED Displays, potentiometers, stepper-motor driver, audio amplifier & speaker, RS-232 interface and a real-time clock. The idea is to allow one to rapidly construct and debug ideas with a minimal of additional wiring.

When performing these experiments, you will follow the same basic processes as done for the WAM text. These experiments are generally at a higher level and often use more advanced programming techniques, some of which will be further explored in class-room discussion. However, you should thoroughly read each experiment and understand the topics presented.

The Stampworks kit and Professional Development Board (PDB) are in limited supply and, unfortunately, are no longer available for purchase. TREAT THEM CAREFULLY. Also, you may wish to or be required to, work with a partner for many of these exercises. Due to the complexity of some of the Activities, working with a partner is probably a good idea. Due to the limited supply, you CANNOT borrow the boards UNLESS you have the express written approval of Prof. Jagodowski, and even then, if granted, the term will be very limited.

You will notice that the list below begins with Experiments #26 & #27, then back to Experiment #10. It is advised you perform these Experiments in this order. You might find the experiments on Servo Motor and Stepper Motor Control useful for your Advanced Manufacturing (EET-265) project.

The required experiments in the StampWorks Manual are:

Experiment #26: Hobby Servo Motor Control
Experiment #27: Stepper Motor Control
Experiment #10: A Digital Clock
Experiments #11, 12 & 13: Using an LCD Display
Experiment #14: Scanning & Debouncing Multiple Inputs
Experiment #16: Frequency Measurement
Experiment #17: Advanced Frequency Measurement
Experiment #18: A Light Controlled Theremin
Experiment #21: Analog Input with PULSIN
Experiment #22: Analog Output with PWM
Experiment #31: Advanced 7-Segment Multiplexing*
Experiment #32: I2C Communications*
Experiment #33: Using A Real-Time Clock

*These Experiments require external parts not contained within the StampWorks Board Inventory. See your instructor for these components.

In addition, you will be required to perform some additional experiments using the PING Ultrasonic Sensor, a 4x4 KeyPad and, if not already completed, viewing BS2 I/O signals on the Agilent Digital Scopes, to name a few.

crlapan
Posts: 56
Joined: Tue Sep 12, 2017 10:19 am

Re: Week #9: (3/18-22) StampWorks Experiments #2.

Post by crlapan » Tue Apr 02, 2019 3:11 pm

Experiments # 2 Complete CRL 4/02/19
experiments 12,13,14,16
here is screen shot for EXP16 Frequency Measurement
exp_16.png
exp_16.png (21.91 KiB) Viewed 85 times
Last edited by crlapan on Tue Apr 02, 2019 3:57 pm, edited 1 time in total.

djean0001
Posts: 56
Joined: Tue Sep 12, 2017 1:38 pm

Re: Week #9: (3/18-22) StampWorks Experiments #2.

Post by djean0001 » Tue Apr 02, 2019 3:18 pm

Experiments # 2 Complete DJ 4/02/19
experiments 12,13,14,16
here is the screen shot from experiment 16 the frequency measurement
exp_16.png
exp_16.png (21.91 KiB) Viewed 84 times

ctboutin0001
Posts: 63
Joined: Mon Sep 18, 2017 9:18 am

Re: Week #9: (3/18-22) StampWorks Experiments #2.

Post by ctboutin0001 » Thu May 02, 2019 3:28 pm

I have finished experiments 12, 13 ,14 and 16. Attached if the screenshot from experiment 16.
Attachments
exp16.png
exp16.png (21.97 KiB) Viewed 60 times

ajfranqui0001
Posts: 54
Joined: Mon Sep 25, 2017 10:29 am

Re: Week #9: (3/18-22) StampWorks Experiments #2.

Post by ajfranqui0001 » Mon May 06, 2019 11:11 am

I have completed 12,13,14 and 16
Attachments
exp16.png
exp16.png (21.97 KiB) Viewed 56 times

almarafuga0001
Posts: 60
Joined: Fri Sep 15, 2017 9:18 am

Re: Week #9: (3/18-22) StampWorks Experiments #2.

Post by almarafuga0001 » Mon May 06, 2019 11:41 am

I have completed labs 12,13,14, and 16, here is 16
Attachments
exp16[1].png
exp16[1].png (21.97 KiB) Viewed 55 times

rmgoulet0001
Posts: 15
Joined: Fri Sep 15, 2017 9:11 am

Re: Week #9: (3/18-22) StampWorks Experiments #2.

Post by rmgoulet0001 » Fri May 10, 2019 8:53 pm

Done in class

Post Reply

Return to “EET-260 Lab”