Week #6: (2/25-3/1) BS2 I/O Signals

Post Reply
rjagodowski
Posts: 1663
Joined: Fri Sep 04, 2015 6:59 pm

Week #6: (2/25-3/1) BS2 I/O Signals

Post by rjagodowski »

At this point, you should have completed all of the exercises and you are expected to know all of the content presented in the WAM text.

This week you should be performing the experiment to investigate the Input/Output Signals used by the BS2. A printed copy of the lab will be distributed in class on 2/25. The pdf of the lab is attached here:
I_O BS2 Signal Viewing Lab v16.1.pdf
(110.29 KiB) Downloaded 48 times
This experiment requires the use of components and equipment here at STCC so this lab must be completed on campus. You will use the Agilent Digital Oscilloscope to take screen shots of the various parts of this lab.

The documents below are provided for support for the lab. They are taken from the Basic Stamp Syntax and Reference Manual. You should READ THEM before performing the experiment.
Attachments
RCTime Command.pdf
(458.79 KiB) Downloaded 40 times
PULSIN Command.pdf
(134.35 KiB) Downloaded 32 times
FREQOUT from Syntax Manual.pdf
(136.12 KiB) Downloaded 38 times
crlapan
Posts: 56
Joined: Tue Sep 12, 2017 10:19 am

Re: Week #6: (2/25-3/1) BS2 I/O Signals

Post by crlapan »

I have completed this lab
high_low_pause.png
high_low_pause.png (26.69 KiB) Viewed 532 times
high_low_pause_25DC_40hz.png
high_low_pause_25DC_40hz.png (25.87 KiB) Viewed 532 times
puls_out1.png
puls_out1.png (26.59 KiB) Viewed 532 times
Pulsout 850
puls_out2.png
puls_out2.png (26.22 KiB) Viewed 532 times
pulsin_01.png
pulsin_01.png (28.45 KiB) Viewed 532 times
rc_time_2.png
rc_time_2.png (29.53 KiB) Viewed 528 times
freqout.png
freqout.png (29.31 KiB) Viewed 525 times
Last edited by crlapan on Tue Mar 19, 2019 3:08 pm, edited 1 time in total.
ctboutin0001
Posts: 63
Joined: Mon Sep 18, 2017 9:18 am

Re: Week #6: (2/25-3/1) BS2 I/O Signals

Post by ctboutin0001 »

I have completed the lab for this week. Here are the screenshots.
Attachments
chandler.png
chandler.png (24.6 KiB) Viewed 526 times
PULSOUT 850
PULSOUT 850
anthony850.png (22.35 KiB) Viewed 526 times
fredo.png
fredo.png (24.18 KiB) Viewed 526 times
freqout.png
freqout.png (34.52 KiB) Viewed 526 times
rctime.png
rctime.png (25.67 KiB) Viewed 526 times
ajfranqui0001
Posts: 54
Joined: Mon Sep 25, 2017 10:29 am

Re: Week #6: (2/25-3/1) BS2 I/O Signals

Post by ajfranqui0001 »

I have completed the lab for this week. Here are the screenshots.
Attachments
rctime.png
rctime.png (25.67 KiB) Viewed 525 times
chandler.png
chandler.png (24.6 KiB) Viewed 525 times
fredo1.png
fredo1.png (23.92 KiB) Viewed 525 times
pulsout 850
pulsout 850
anthony850.png (22.35 KiB) Viewed 525 times
freqout.png
freqout.png (34.52 KiB) Viewed 525 times
djean0001
Posts: 56
Joined: Tue Sep 12, 2017 1:38 pm

Re: Week #6: (2/25-3/1) BS2 I/O Signals

Post by djean0001 »

Lab Complete I/O Signals on the Bs2
high_low_pause.png
high_low_pause.png (26.69 KiB) Viewed 523 times
high_low_pause_25DC_40hz.png
high_low_pause_25DC_40hz.png (25.87 KiB) Viewed 523 times
puls_out1.png
puls_out1.png (26.59 KiB) Viewed 523 times
w/ 850 value
puls_out2.png
puls_out2.png (26.22 KiB) Viewed 523 times
pulsin_01.png
pulsin_01.png (28.45 KiB) Viewed 523 times
rc_time_2.png
rc_time_2.png (29.53 KiB) Viewed 523 times
freqout.png
freqout.png (29.31 KiB) Viewed 523 times
almarafuga0001
Posts: 60
Joined: Fri Sep 15, 2017 9:18 am

Re: Week #6: (2/25-3/1) BS2 I/O Signals

Post by almarafuga0001 »

I have completed the lab for this week, here are the screenshots.
Attachments
anthony850.png
anthony850.png (22.35 KiB) Viewed 521 times
fredo.png
fredo.png (24.18 KiB) Viewed 521 times
chandler.png
chandler.png (24.6 KiB) Viewed 521 times
rctime.png
rctime.png (25.67 KiB) Viewed 521 times
freqout.png
freqout.png (34.52 KiB) Viewed 521 times
Post Reply

Return to “EET-260 Lab”