Week #6: (2/25-3/1) BS2 I/O Signals

[rjagodowski]

At this point, you should have completed all of the exercises and you are expected to know all of the content presented in the WAM text.

This week you should be performing the experiment to investigate the Input/Output Signals used by the BS2. A printed copy of the lab will be distributed in class on 2/25. The pdf of the lab is attached here:

I_O BS2 Signal Viewing Lab v16.1.pdf

(110.29 KiB) Downloaded 208 times

This experiment requires the use of components and equipment here at STCC so this lab must be completed on campus. You will use the Agilent Digital Oscilloscope to take screen shots of the various parts of this lab.

The documents below are provided for support for the lab. They are taken from the Basic Stamp Syntax and Reference Manual. You should READ THEM before performing the experiment.

[crlapan]

I have completed this lab

high_low_pause.png (26.69 KiB) Viewed 3484 times

high_low_pause_25DC_40hz.png (25.87 KiB) Viewed 3484 times

puls_out1.png (26.59 KiB) Viewed 3484 times

Pulsout 850

puls_out2.png (26.22 KiB) Viewed 3484 times

pulsin_01.png (28.45 KiB) Viewed 3484 times

rc_time_2.png (29.53 KiB) Viewed 3480 times

freqout.png (29.31 KiB) Viewed 3477 times

[ctboutin0001]

I have completed the lab for this week. Here are the screenshots.

[ajfranqui0001]

I have completed the lab for this week. Here are the screenshots.

[djean0001]

Lab Complete I/O Signals on the Bs2

high_low_pause.png (26.69 KiB) Viewed 3475 times

high_low_pause_25DC_40hz.png (25.87 KiB) Viewed 3475 times

puls_out1.png (26.59 KiB) Viewed 3475 times

w/ 850 value

puls_out2.png (26.22 KiB) Viewed 3475 times

pulsin_01.png (28.45 KiB) Viewed 3475 times

rc_time_2.png (29.53 KiB) Viewed 3475 times

freqout.png (29.31 KiB) Viewed 3475 times

[almarafuga0001]

I have completed the lab for this week, here are the screenshots.