Week #6: (2/25-3/1) BS2 I/O Signals

Post Reply
rjagodowski
Posts: 2370
Joined: Fri Sep 04, 2015 6:59 pm

Week #6: (2/25-3/1) BS2 I/O Signals

Post by rjagodowski »

At this point, you should have completed all of the exercises and you are expected to know all of the content presented in the WAM text.

This week you should be performing the experiment to investigate the Input/Output Signals used by the BS2. A printed copy of the lab will be distributed in class on 2/25. The pdf of the lab is attached here:
I_O BS2 Signal Viewing Lab v16.1.pdf
(110.29 KiB) Downloaded 207 times
This experiment requires the use of components and equipment here at STCC so this lab must be completed on campus. You will use the Agilent Digital Oscilloscope to take screen shots of the various parts of this lab.

The documents below are provided for support for the lab. They are taken from the Basic Stamp Syntax and Reference Manual. You should READ THEM before performing the experiment.
Attachments
RCTime Command.pdf
(458.79 KiB) Downloaded 201 times
PULSIN Command.pdf
(134.35 KiB) Downloaded 187 times
FREQOUT from Syntax Manual.pdf
(136.12 KiB) Downloaded 202 times
crlapan
Posts: 56
Joined: Tue Sep 12, 2017 10:19 am

Re: Week #6: (2/25-3/1) BS2 I/O Signals

Post by crlapan »

I have completed this lab
high_low_pause.png
high_low_pause.png (26.69 KiB) Viewed 3473 times
high_low_pause_25DC_40hz.png
high_low_pause_25DC_40hz.png (25.87 KiB) Viewed 3473 times
puls_out1.png
puls_out1.png (26.59 KiB) Viewed 3473 times
Pulsout 850
puls_out2.png
puls_out2.png (26.22 KiB) Viewed 3473 times
pulsin_01.png
pulsin_01.png (28.45 KiB) Viewed 3473 times
rc_time_2.png
rc_time_2.png (29.53 KiB) Viewed 3469 times
freqout.png
freqout.png (29.31 KiB) Viewed 3466 times
Last edited by crlapan on Tue Mar 19, 2019 3:08 pm, edited 1 time in total.
ctboutin0001
Posts: 63
Joined: Mon Sep 18, 2017 9:18 am

Re: Week #6: (2/25-3/1) BS2 I/O Signals

Post by ctboutin0001 »

I have completed the lab for this week. Here are the screenshots.
Attachments
chandler.png
chandler.png (24.6 KiB) Viewed 3467 times
PULSOUT 850
PULSOUT 850
anthony850.png (22.35 KiB) Viewed 3467 times
fredo.png
fredo.png (24.18 KiB) Viewed 3467 times
freqout.png
freqout.png (34.52 KiB) Viewed 3467 times
rctime.png
rctime.png (25.67 KiB) Viewed 3467 times
ajfranqui0001
Posts: 54
Joined: Mon Sep 25, 2017 10:29 am

Re: Week #6: (2/25-3/1) BS2 I/O Signals

Post by ajfranqui0001 »

I have completed the lab for this week. Here are the screenshots.
Attachments
rctime.png
rctime.png (25.67 KiB) Viewed 3466 times
chandler.png
chandler.png (24.6 KiB) Viewed 3466 times
fredo1.png
fredo1.png (23.92 KiB) Viewed 3466 times
pulsout 850
pulsout 850
anthony850.png (22.35 KiB) Viewed 3466 times
freqout.png
freqout.png (34.52 KiB) Viewed 3466 times
djean0001
Posts: 56
Joined: Tue Sep 12, 2017 1:38 pm

Re: Week #6: (2/25-3/1) BS2 I/O Signals

Post by djean0001 »

Lab Complete I/O Signals on the Bs2
high_low_pause.png
high_low_pause.png (26.69 KiB) Viewed 3464 times
high_low_pause_25DC_40hz.png
high_low_pause_25DC_40hz.png (25.87 KiB) Viewed 3464 times
puls_out1.png
puls_out1.png (26.59 KiB) Viewed 3464 times
w/ 850 value
puls_out2.png
puls_out2.png (26.22 KiB) Viewed 3464 times
pulsin_01.png
pulsin_01.png (28.45 KiB) Viewed 3464 times
rc_time_2.png
rc_time_2.png (29.53 KiB) Viewed 3464 times
freqout.png
freqout.png (29.31 KiB) Viewed 3464 times
almarafuga0001
Posts: 60
Joined: Fri Sep 15, 2017 9:18 am

Re: Week #6: (2/25-3/1) BS2 I/O Signals

Post by almarafuga0001 »

I have completed the lab for this week, here are the screenshots.
Attachments
anthony850.png
anthony850.png (22.35 KiB) Viewed 3462 times
fredo.png
fredo.png (24.18 KiB) Viewed 3462 times
chandler.png
chandler.png (24.6 KiB) Viewed 3462 times
rctime.png
rctime.png (25.67 KiB) Viewed 3462 times
freqout.png
freqout.png (34.52 KiB) Viewed 3462 times
Post Reply

Return to “EET-260 Lab”