Week #6: (2/24-28) Intro to Parallax Process Control - Wk. #1

Post Reply
rjagodowski
Posts: 1642
Joined: Fri Sep 04, 2015 6:59 pm

Week #6: (2/24-28) Intro to Parallax Process Control - Wk. #1

Post by rjagodowski »

This week will be the introduction to using the Basic Stamp and the Parallax Process Control text.


The lab sheet for this week's lab is here:
Here is the parts list of all of the components which should be in the kit:
Process Control Parts List_p312.pdf
(66.57 KiB) Downloaded 31 times
The above two documents will be printed for you and available on the day you schedule this experiment.

When you finish this exercise, make a post in the form of a Reply to this topic stating you have completed the assignment. Upon completion of this exercise you should have a parts kit with all components (or a list of the component needed) and have completed Chapters 1 & 2 in the Parallax Process Control text.

The Parallax Process Control text can be downloaded directly from Parallax, but you are better off to use the version attached here as this contains the combined text with the errata file. (The original text and errata file are available at the end of this post if you insist on using those.)
Process Control Text v1.0.19.pdf
(12.45 MiB) Downloaded 36 times

Here is the link where you can download the Process Control Example Code. These are ALL of the BS2 programs required in the Process Control text. If you download these, you can open them directly directly with the BS2 Editor so you won't have to "copy and paste" from the pdf file. The zipped file of these programs is also available directly here:
Here's the link to download the StampPlot software needed for many of the exercises. Be sure to download the proper version for your operating system. Version 3 Release 8.5 is for Vista/Win7/Win8 & (WIn10) and Version 3 Release 7.5 is for Windows XP.


You will also need the StampPlot Macros or here:
122-28176-StampPlot-PC-Macros-v1.0.zip
(410.8 KiB) Downloaded 33 times
Here is a pdf of just Chapter 3 of the Process Control Text which will be your assignment for next week (Week #7):
Process-Control-Text-CHapter 3_v1.0.pdf
(1.24 MiB) Downloaded 27 times

The two documents below are the original Process Control text and the accompanying Errata file. You DO NOT NEED these two pdfs if you download and save the single Process Control Text v1.0.19.pdf file above. They are provided strictly should you wish to use the original Parallax documents.
122-28176-Process-Control-Text-v1.0.pdf
(10.01 MiB) Downloaded 30 times
122-28176-Process-Control-v1.0-Errata.pdf
(87.19 KiB) Downloaded 24 times
kjbusiere0001
Posts: 53
Joined: Fri Jan 26, 2018 10:10 am

Re: Week #6: (2/24-28) Intro to Parallax Process Control - Wk. #1

Post by kjbusiere0001 »

Finished chapter 1 and 2.
erivera0005
Posts: 38
Joined: Thu Jan 25, 2018 6:13 pm

Re: Week #6: (2/24-28) Intro to Parallax Process Control - Wk. #1

Post by erivera0005 »

I've completed Chapter 1 & 2
csrichter0001
Posts: 43
Joined: Mon Feb 04, 2019 9:22 pm

Re: Week #6: (2/24-28) Intro to Parallax Process Control - Wk. #1

Post by csrichter0001 »

Conner Richter has completed this lab
wjnieves0001
Posts: 36
Joined: Fri Sep 14, 2018 9:21 am

Re: Week #6: (2/24-28) Intro to Parallax Process Control - Wk. #1

Post by wjnieves0001 »

i have completed this lab
avkaptyug0001
Posts: 43
Joined: Fri Sep 07, 2018 10:15 am

Re: Week #6: (2/24-28) Intro to Parallax Process Control - Wk. #1

Post by avkaptyug0001 »

I have completed the lab
Attachments
Capture ch2.1.PNG
Capture ch2.1.PNG (503.08 KiB) Viewed 484 times
Rmreed0001
Posts: 27
Joined: Mon Sep 10, 2018 9:21 am

Re: Week #6: (2/24-28) Intro to Parallax Process Control - Wk. #1

Post by Rmreed0001 »

I have finished chapters 1 and 2
pbanaru0001
Posts: 35
Joined: Wed Sep 12, 2018 9:15 am

Re: Week #6: (2/24-28) Intro to Parallax Process Control - Wk. #1

Post by pbanaru0001 »

I have completer chapter 1 and 2
mszmyd0001
Posts: 26
Joined: Fri Sep 07, 2018 9:29 am

Re: Week #6: (2/24-28) Intro to Parallax Process Control - Wk. #1

Post by mszmyd0001 »

Completed the lab.
vshostak
Posts: 45
Joined: Mon Sep 10, 2018 1:48 pm

Re: Week #6: (2/24-28) Intro to Parallax Process Control - Wk. #1

Post by vshostak »

I have complete Ch 1-2
Post Reply

Return to “EET-250 Lab”