Week #6: (2/24-28) Intro to Parallax Process Control - Wk. #1
Posted: Fri Feb 21, 2020 6:57 pm
This week will be the introduction to using the Basic Stamp and the Parallax Process Control text.
The lab sheet for this week's lab is here: Here is the parts list of all of the components which should be in the kit: The above two documents will be printed for you and available on the day you schedule this experiment.
When you finish this exercise, make a post in the form of a Reply to this topic stating you have completed the assignment. Upon completion of this exercise you should have a parts kit with all components (or a list of the component needed) and have completed Chapters 1 & 2 in the Parallax Process Control text.
The Parallax Process Control text can be downloaded directly from Parallax, but you are better off to use the version attached here as this contains the combined text with the errata file. (The original text and errata file are available at the end of this post if you insist on using those.)
Here is the link where you can download the Process Control Example Code. These are ALL of the BS2 programs required in the Process Control text. If you download these, you can open them directly directly with the BS2 Editor so you won't have to "copy and paste" from the pdf file. The zipped file of these programs is also available directly here:
Here's the link to download the StampPlot software needed for many of the exercises. Be sure to download the proper version for your operating system. Version 3 Release 8.5 is for Vista/Win7/Win8 & (WIn10) and Version 3 Release 7.5 is for Windows XP.
You will also need the StampPlot Macros or here: Here is a pdf of just Chapter 3 of the Process Control Text which will be your assignment for next week (Week #7):
The two documents below are the original Process Control text and the accompanying Errata file. You DO NOT NEED these two pdfs if you download and save the single Process Control Text v1.0.19.pdf file above. They are provided strictly should you wish to use the original Parallax documents.
The lab sheet for this week's lab is here: Here is the parts list of all of the components which should be in the kit: The above two documents will be printed for you and available on the day you schedule this experiment.
When you finish this exercise, make a post in the form of a Reply to this topic stating you have completed the assignment. Upon completion of this exercise you should have a parts kit with all components (or a list of the component needed) and have completed Chapters 1 & 2 in the Parallax Process Control text.
The Parallax Process Control text can be downloaded directly from Parallax, but you are better off to use the version attached here as this contains the combined text with the errata file. (The original text and errata file are available at the end of this post if you insist on using those.)
Here is the link where you can download the Process Control Example Code. These are ALL of the BS2 programs required in the Process Control text. If you download these, you can open them directly directly with the BS2 Editor so you won't have to "copy and paste" from the pdf file. The zipped file of these programs is also available directly here:
Here's the link to download the StampPlot software needed for many of the exercises. Be sure to download the proper version for your operating system. Version 3 Release 8.5 is for Vista/Win7/Win8 & (WIn10) and Version 3 Release 7.5 is for Windows XP.
You will also need the StampPlot Macros or here: Here is a pdf of just Chapter 3 of the Process Control Text which will be your assignment for next week (Week #7):
The two documents below are the original Process Control text and the accompanying Errata file. You DO NOT NEED these two pdfs if you download and save the single Process Control Text v1.0.19.pdf file above. They are provided strictly should you wish to use the original Parallax documents.