Week #6: (2/24-28) BS2 I/O Signals

[rjagodowski]

At this point, you should have completed all of the exercises and you are expected to know all of the content presented in the WAM text.

This week you should be performing the experiment to investigate the Input/Output Signals used by the BS2. A printed copy of the lab will be distributed in class on 2/24. The pdf of the lab is attached here:

I_O BS2 Signal Viewing Lab v16.1.pdf

(110.29 KiB) Downloaded 247 times

This experiment requires the use of components and equipment here at STCC so this lab must be completed on campus. You will use the Agilent Digital Oscilloscope to take screen shots of the various parts of this lab.

Post your Screenshot in the form of a Reply to this Topic.

The documents below are provided for support for the lab. They are taken from the Basic Stamp Syntax and Reference Manual. You should READ THEM BEFORE coming to lab to perform this experiment.

RCTime Command.pdf

(458.79 KiB) Downloaded 248 times

PULSIN Command.pdf

(134.35 KiB) Downloaded 249 times

FREQOUT from Syntax Manual.pdf

(136.12 KiB) Downloaded 242 times

[csrichter0001]

Conner Richter has completed this lab.
Picture 1 => BS2 HIGH/LOW/PAUSE
Picture 2 => 40HZ, 25% D.C.
Picture 3 => PULSOUT
Picture 4 => 850 PULSOUT
Picture 5 => PULSIN
Picture 6 => RCTIME
Picture 7 => FREQOUT

[kjbusiere0001]

Konnor Busiere

[imuhammad]

I/O high low pause

[imuhammad]

change frequency

[imuhammad]

pulsout 850 and 650

[imuhammad]

0.1 uf pulse in

[imuhammad]

.22 uf

[imuhammad]

.47 uf

[htnguyen0003]

i finished IO Signals on the BS2

[wjnieves0001]

Willdiance Nieves
forgot to change labels on first scrennshots

[imuhammad]

frequency 2000

[avkaptyug0001]

lab 260 week #6

[vshostak]

I have complete this lab