Week #12: StampWorks Experiments #1
Posted: Tue Feb 19, 2019 9:30 am
As you complete the experiments below, you should create a post which lists which experiments you completed. As a reference, by the end of Week #14 you should have completed the first 9 StampWorks Experiments listed below through Experiment #18.
You MUST demonstrate at least one of your completed experiments to your instructor each time you are in the lab or you will not receive credit for your posts. I will then verify your post with an edit added to your post with a statement similar to "Verified 4/29/21 by RJ"
Stampworks lab information and assignments were originally posted here in Week #7.
The assignments have been copied again below for your convenience:
The Stampworks Manual can be downloaded here.
The BS2 programs for all of the StampWorks Experiments are contained in this zip file: You will notice that the list below begins with Experiments #26 & #27, then back to Experiment #10. It is advised you perform these Experiments in this order.
The required experiments in the StampWorks Manual are:
Experiment #26: Hobby Servo Motor Control
Experiment #27: Stepper Motor Control
Experiment #10: A Digital Clock
Experiments #11, 12 & 13: Using an LCD Display
Experiment #16: Frequency Measurement
Experiment #17: Advanced Frequency Measurement
Experiment #18: A Light Controlled Theremin
Additional Experiments (Extra-Credit) are:
Experiment #31: Advanced 7-Segment Multiplexing*
Experiment #32: I2C Communications*
Experiment #33: Using A Real-Time Clock
*These Experiments require external parts not contained within the StampWorks Board Inventory. See your instructor for these components.
There will be a few other additional BS2 activities to perform, such as: using the PING Ultrasonic Sensor, a 4x4 KeyPad and, if not already completed, viewing BS2 I/O signals on the Agilent Digital Scopes, to name a few.
You MUST demonstrate at least one of your completed experiments to your instructor each time you are in the lab or you will not receive credit for your posts. I will then verify your post with an edit added to your post with a statement similar to "Verified 4/29/21 by RJ"
Stampworks lab information and assignments were originally posted here in Week #7.
The assignments have been copied again below for your convenience:
The Stampworks Manual can be downloaded here.
The BS2 programs for all of the StampWorks Experiments are contained in this zip file: You will notice that the list below begins with Experiments #26 & #27, then back to Experiment #10. It is advised you perform these Experiments in this order.
The required experiments in the StampWorks Manual are:
Experiment #26: Hobby Servo Motor Control
Experiment #27: Stepper Motor Control
Experiment #10: A Digital Clock
Experiments #11, 12 & 13: Using an LCD Display
Experiment #16: Frequency Measurement
Experiment #17: Advanced Frequency Measurement
Experiment #18: A Light Controlled Theremin
Additional Experiments (Extra-Credit) are:
Experiment #31: Advanced 7-Segment Multiplexing*
Experiment #32: I2C Communications*
Experiment #33: Using A Real-Time Clock
*These Experiments require external parts not contained within the StampWorks Board Inventory. See your instructor for these components.
There will be a few other additional BS2 activities to perform, such as: using the PING Ultrasonic Sensor, a 4x4 KeyPad and, if not already completed, viewing BS2 I/O signals on the Agilent Digital Scopes, to name a few.