Week #15 & #16: (5/3-12) Blue Prints, Technical Diagrams, Mechanics.

Post Reply
rjagodowski
Posts: 2368
Joined: Fri Sep 04, 2015 6:59 pm

Week #15 & #16: (5/3-12) Blue Prints, Technical Diagrams, Mechanics.

Post by rjagodowski »

We will spend this week discussing Blue Prints and other Technical Diagrams such as electronic schematics & ladder diagrams, then on to discuss some mechanical concepts.

Here's a handout on Blueprint Reading:
basicblueprintreading-1 per page.pdf
(2.99 MiB) Downloaded 95 times
Or if you wish to print it (still a lot of paper):
basicblueprintreading-4 per page.pdf
If you wish to print this, this one puts 4 slides on one page.
(3.29 MiB) Downloaded 105 times

From EET-130L:
Six Rules of Drawing a Ladder Diagram.pdf
(640.23 KiB) Downloaded 99 times


Elenco Power Supply Manual & Schematic:
Elenco XP-15K_REV-P-2_Manual.pdf
(2.54 MiB) Downloaded 96 times
PAD-234 Protoboard Manual & Schematics:
PAD-234 Operators Manual.pdf
(421.06 KiB) Downloaded 103 times


Mechanical Tools:

Fastener Basics:
Fastener-Basics.pdf
(628.46 KiB) Downloaded 91 times
How to Use a Torque Wrench.

Video: How to Use a Torque Wrench (4:52)

Bolt Tightening Sequence - Why It Matters.


How to Make A Measurement with a Micrometer (5:40)
Post Reply

Return to “EET-265 Lecture”