Week #6: BS2 I/O Signals

Locked
rjagodowski
Posts: 2370
Joined: Fri Sep 04, 2015 6:59 pm

Week #6: BS2 I/O Signals

Post by rjagodowski »

At this point, you should have completed all of the exercises and you are expected to know all of the content presented in the WAM text.

This week you should be performing the experiment to investigate the Input/Output Signals used by the BS2. A printed copy will be available in the lab. The pdf of the lab is attached here:
I_O BS2 Signal Viewing Lab v16.1.pdf
(110.29 KiB) Downloaded 262 times
This experiment requires the use of components and equipment here at STCC so this lab must be completed on campus. You will use the Agilent Digital Oscilloscope to take screen shots of the various parts of this lab.

The documents below are provided for support for the lab. They are taken from the Basic Stamp Syntax and Reference Manual. You should READ THEM before performing the experiment.
Attachments
RCTime Command.pdf
(458.79 KiB) Downloaded 240 times
PULSIN Command.pdf
(134.35 KiB) Downloaded 240 times
FREQOUT from Syntax Manual.pdf
(136.12 KiB) Downloaded 244 times
cclozinski2001
Posts: 56
Joined: Fri Sep 25, 2020 10:16 am

Re: Week #6: BS2 I/O Signals

Post by cclozinski2001 »

Cole Lozinski and Korey Houle

Pictures 1 and 2 is High/LOW/Pause

Pictures 3,4, and 5 are Pulsout

Pictures 6 and 7 are Pulsin

Picture 8 is Freqout
Attachments
scope_98.png
scope_98.png (24.6 KiB) Viewed 2329 times
scope_99.png
scope_99.png (24.3 KiB) Viewed 2329 times
scope_100.png
scope_100.png (23.78 KiB) Viewed 2329 times
scope_101.png
scope_101.png (23.81 KiB) Viewed 2329 times
scope_102.png
scope_102.png (23.62 KiB) Viewed 2329 times
scope_103.png
scope_103.png (23.95 KiB) Viewed 2329 times
scope_104.png
scope_104.png (25.76 KiB) Viewed 2329 times
scope_105.png
scope_105.png (34.68 KiB) Viewed 2329 times
jejagodowski2001
Posts: 47
Joined: Tue Sep 14, 2021 7:00 pm

Re: Week #6: BS2 I/O Signals

Post by jejagodowski2001 »

Joseph Jagodowski Week #6

1. On time: 25 ms
Off time: 10 ms
2. 40 Hz 25% D.C.
3. Pulsout: 850
Pause: 20
4. Pulsin .47 uF
5. RCTime 40% of potentiometer value
6. Freqout 1 kHz
Attachments
scope_0.png
scope_0.png (22.62 KiB) Viewed 2329 times
scope_1.png
scope_1.png (22.7 KiB) Viewed 2329 times
scope_3.png
scope_3.png (22.16 KiB) Viewed 2329 times
scope_6.png
scope_6.png (25.42 KiB) Viewed 2329 times
scope_9.png
scope_9.png (24.08 KiB) Viewed 2329 times
scope_13.png
scope_13.png (25.74 KiB) Viewed 2329 times
jrgonzalez2001
Posts: 54
Joined: Fri Sep 25, 2020 10:38 am

Re: Week #6: BS2 I/O Signals

Post by jrgonzalez2001 »

Jorge Gonzalez

Pic #1 - 40Hz and 25% Duty Cycle

Pic #2 PULSOUT 650 and PAUSE 18

Pic #3 PULSIN Capacitor 0.22 microfarad

Pic #4 RCTIME with 60% of 10k ohm pot

Pic #5 FREQOUT, 10, 5000, 2000
Attachments
2.jpg
2.jpg (563.14 KiB) Viewed 2328 times
5.jpg
5.jpg (531.02 KiB) Viewed 2328 times
6.jpg
6.jpg (538.83 KiB) Viewed 2328 times
7.jpg
7.jpg (534.88 KiB) Viewed 2328 times
8.jpg
8.jpg (537.43 KiB) Viewed 2328 times
issalman
Posts: 36
Joined: Wed Sep 16, 2020 9:24 am

Re: Week #6: BS2 I/O Signals

Post by issalman »

Week 6
Attachments
31394DF0-F0AB-416B-9538-A39AF0E2890B.jpeg
31394DF0-F0AB-416B-9538-A39AF0E2890B.jpeg (2.46 MiB) Viewed 2306 times
FE83787C-5CC8-490E-913E-1C328D6246F1.jpeg
FE83787C-5CC8-490E-913E-1C328D6246F1.jpeg (2.58 MiB) Viewed 2306 times
A0A97ABA-AC46-4705-9533-DF459BBA7615.jpeg
A0A97ABA-AC46-4705-9533-DF459BBA7615.jpeg (2.51 MiB) Viewed 2306 times
76689E9A-247E-40D0-B0E8-F32FB637E45F.jpeg
76689E9A-247E-40D0-B0E8-F32FB637E45F.jpeg (2.59 MiB) Viewed 2306 times
0F3B7379-49ED-4C43-8E31-A79A8D5A32F3.jpeg
0F3B7379-49ED-4C43-8E31-A79A8D5A32F3.jpeg (2.52 MiB) Viewed 2306 times
DFE3BCC3-F7F4-469E-ADC6-A537C154F8A0.jpeg
DFE3BCC3-F7F4-469E-ADC6-A537C154F8A0.jpeg (3.24 MiB) Viewed 2306 times
npdesantis
Posts: 58
Joined: Fri Sep 25, 2020 10:35 am

Re: Week #6: BS2 I/O Signals

Post by npdesantis »

1.High low Pause
2.Pulsout
3.pulsin
4.RCruntime
5.frequout
Attachments
40hz25.jpg
40hz25.jpg (3.91 MiB) Viewed 2246 times
pulsout.jpg
pulsout.jpg (3.3 MiB) Viewed 2246 times
pulsin.jpg
pulsin.jpg (2.92 MiB) Viewed 2246 times
rcruntime.jpg
rcruntime.jpg (3.39 MiB) Viewed 2246 times
frequout.jpg
frequout.jpg (3.86 MiB) Viewed 2246 times
Rplizak
Posts: 32
Joined: Tue Sep 15, 2020 7:08 pm

Re: Week #6: BS2 I/O Signals

Post by Rplizak »

1.High low Pause
2.Pulsout
3.pulsin
4.RCruntime
5.frequout
Attachments
20220301_154022.jpg
20220301_154022.jpg (3.97 MiB) Viewed 2241 times
20220301_150502.jpg
20220301_150502.jpg (3.62 MiB) Viewed 2241 times
20220301_134150.jpg
20220301_134150.jpg (3.53 MiB) Viewed 2241 times
20220301_143211.jpg
20220301_143211.jpg (3.31 MiB) Viewed 2241 times
20220301_133851.jpg
20220301_133851.jpg (3.45 MiB) Viewed 2241 times
20220301_133817.jpg
20220301_133817.jpg (3.42 MiB) Viewed 2241 times
Locked

Return to “EET-260 Lab”