Week #7: Catch-Up Week/StampWorks Experiments - Week #1

Locked
rjagodowski
Posts: 2371
Joined: Fri Sep 04, 2015 6:59 pm

Week #7: Catch-Up Week/StampWorks Experiments - Week #1

Post by rjagodowski »

This week you can use our lab time to put your finishing touches and to do demonstrations for your Traffic Light Project. Remember the completed project is due on or before 5:00 PM. on Thursday, March 10, 2022. Full information for the project and it's requirements can be found here. Remember to make your Forum posts as specified.

When we return from Spring Break (NEXT WEEK!!!!), we will begin using the StampWorks Experiments. I've included some of the information here so that you can begin to review the experiments you'll be performing later this semester.

The StampWorks kit uses the BS2 Professional Development Board to perform more advanced experiments using a minimum of external hardware. In this way, you should be able to complete 2, 3 or even 4 experiments in a week.



As you complete the experiments below, you should create a post which lists which experiments you completed. As a reference, by the end of Week #12 you should have completed the first 9 StampWorks Experiments listed below through Experiment #18. There will be other experiments to perform after these such as: using the PING Ultrasonic Sensor and a 4x4 KeyPad, plus the Extra-Credit experiments listed below.


You MUST demonstrate at least one of your completed experiments to your instructor each time you are in the lab or you will not receive credit for your posts. I will then verify your post with an edit added to your post with a statement similar to "Verified 3/29/22 by RJ"



The assignments/experiments you will need to perform are listed below.

The Stampworks Manual can be downloaded here. On that same page you should also download the pdf for the BS2 Professional Development Board, which includes information on the capabilities of that system.

The BS2 programs for all of the StampWorks Experiments are contained in this zip file:
27297-StampWorks-Source-v2.1.zip
(75.1 KiB) Downloaded 221 times
If you download this file you do not have to copy and paste the BS2 code.

You will notice that the list below begins with Experiments #26 & #27, then back to Experiment #10. It is advised you perform these Experiments in this order.

The required experiments in the StampWorks Manual are:

Experiment #26: Hobby Servo Motor Control
Experiment #27: Stepper Motor Control
Experiment #10: A Digital Clock
Experiments #11, 12 & 13: Using an LCD Display
Experiment #16: Frequency Measurement
Experiment #17: Advanced Frequency Measurement
Experiment #18: A Light Controlled Theremin

Additional Experiments (Extra-Credit) are:
Experiment #31: Advanced 7-Segment Multiplexing*
Experiment #32: I2C Communications*
Experiment #33: Using A Real-Time Clock

*These Experiments require external parts not contained within the StampWorks Board Inventory. See your instructor for these components.

There will be a few other additional BS2 activities to perform, such as: using the PING Ultrasonic Sensor, a 4x4 KeyPad and, if not already completed, viewing BS2 I/O signals on the Agilent Digital Scopes, to name a few.
npdesantis
Posts: 58
Joined: Fri Sep 25, 2020 10:35 am

Re: Week #7: Catch-Up Week/StampWorks Experiments - Week #1

Post by npdesantis »

completed experiment #26 and #27
npdesantis
Posts: 58
Joined: Fri Sep 25, 2020 10:35 am

Re: Week #7: Catch-Up Week/StampWorks Experiments - Week #1

Post by npdesantis »

completed experiment 10
cclozinski2001
Posts: 56
Joined: Fri Sep 25, 2020 10:16 am

Re: Week #7: Catch-Up Week/StampWorks Experiments - Week #1

Post by cclozinski2001 »

Cole Lozinski and Korey Houle

We have completed experiments 26,27,10,11,12,13.
jrgonzalez2001
Posts: 54
Joined: Fri Sep 25, 2020 10:38 am

Re: Week #7: Catch-Up Week/StampWorks Experiments - Week #1

Post by jrgonzalez2001 »

Jorge Gonzalez

I have completed experiments #26 and #27 on 3/31/2021
afnaser0001
Posts: 15
Joined: Tue Mar 31, 2020 11:02 am

Re: Week #7: Catch-Up Week/StampWorks Experiments - Week #1

Post by afnaser0001 »

I have completed experiments #26 and #27 on 3/31/2021
jejagodowski2001
Posts: 47
Joined: Tue Sep 14, 2021 7:00 pm

Re: Week #7: Catch-Up Week/StampWorks Experiments - Week #1

Post by jejagodowski2001 »

4/5/2022 I have completed Experiments 10, 11, 12, and 13
wmpenalo0001
Posts: 35
Joined: Tue Sep 21, 2021 1:00 pm

Re: Week #7: Catch-Up Week/StampWorks Experiments - Week #1

Post by wmpenalo0001 »

William Issan . Abdul
We had completed Experiments 27,26, 10 in april but it was not posted on here
Locked

Return to “EET-260 Lab”