Week #15 (5/2-6) Weekly Progress Report

Post Reply
rjagodowski
Posts: 2371
Joined: Fri Sep 04, 2015 6:59 pm

Week #15 (5/2-6) Weekly Progress Report

Post by rjagodowski »

Post your progress, contributions, work and anything else you did for the Team project here.

Be sure to read the End of Semester Project Details posted as an Announcement in the Lecture part of the forums.

There will be a separate Topic for each week during the semester.

These are individual posts, so each member must post their own progress report. If you worked with others, or the entire group, then you can mention that in your post as well. But each member must post to receive credit for this week's post.
npdesantis
Posts: 58
Joined: Fri Sep 25, 2020 10:35 am

Re: Week #15 (5/2-6) Weekly Progress Report

Post by npdesantis »

working on trimpot plc card temp, ph, humidity on HMI, pump program too, continued with greenhouse part of written report
jrgonzalez2001
Posts: 54
Joined: Fri Sep 25, 2020 10:38 am

Re: Week #15 (5/2-6) Weekly Progress Report

Post by jrgonzalez2001 »

Jorge Gonzalez

This week I did mostly programming for the PLC program and the HMI program. I worked with Joe to get the HMI to talk to the PLC which talks to the Dobot and Fanuc that ultimately decides if we are taking pots out of the greenhouse, and where, or taking pots into the greenhouse.
Post Reply

Return to “Automated Greenhouse - Weekly Progress Reports (Individual)”