Week #1 & #2: Lean, Six Sigma, 5S & 6S

Post Reply
rjagodowski
Posts: 2368
Joined: Fri Sep 04, 2015 6:59 pm

Week #1 & #2: Lean, Six Sigma, 5S & 6S

Post by rjagodowski »

Scroll down to the bottom of this post for the Homework assignment.

This week we begin the discussion on LEAN, 5S & Six Sigma. These are three initiatives which many companies are instituting to improve quality and reduce waste within their organization

The concept of LEAN is to minimize waste. Read through the attachment LEAN Brings Results. Make special note of the spaghetti diagram and the dollar amount of WIP (work in progress). Here's the pdf:
LEAN brings results_a.pdf
(429.03 KiB) Downloaded 248 times
The Eight Wastes of LEAN from Wisconline.com. This is a pseudo-video you should watch showing the 8 wastes of LEAN using the acronym DOWNTIME (Defects, Overproduction, Waiting, Non-Utilized Skills, Transportation, Inventory, Motion & Excess Processing).

Here's a quote from the Defense Acquisition University:

"Lean Manufacturing is a manufacturing philosophy which shortens the time between the customer order and the product build/shipment by eliminating sources of waste."

Perhaps the best definition of Lean that we have encountered is based upon a story told by Mr. Ohno-who in a discussion with Mr. Cho (the future president of Toyota Motor Manufacturing Company, Georgetown KY) about the origins of the TPS (Toyota Production System), indicated that (what we now call Lean) is a manufacturing phenomenon that seeks to "maximize the work effort of a company's number one resource, the People." Lean is therefore "a way of thinking" to adapt to change, eliminate waste, and continuously improve. There are a number of tools and techniques, to be used in concert, to achieve maximizing the effort of the workforce and to operate as a "lean" company."


Here is the Wikipedia description of "Lean".
http://en.wikipedia.org/wiki/Lean_manufacturing


Here's Wikipedia on muda or "waste". In this link, they show the "7 Wastes of LEAN" using the acronym TimWood (Transport, Inventory, Motion, Waiting, Overproduction, Overprocessing & Defects).


A term often included in discussions of LEAN is Six Sigma. More will be discussed about this, but here is a brief introduction. Six Sigma deals with minimizing process variation.
Here's a brief description of "lean six sigma"
http://en.wikipedia.org/wiki/Lean_Six_S ... plified.29

5S Methodology is a workplace organization concept. Originally in Japanese, the English word translation for 5S is: Sort, Set in Order, Shine, Standardize & Sustain.

5S Workplaces: When Safety & LEAN meet.

What is 6S LEAN?



Cellular Manufacturing involves creating production work stations and equipment arranged in a sequence that supports a smooth flow of materials and components. Cellular Manufacturing from Encyclopedia.com. Here's the highlighted pdf:
Cellular Manufacturing_2022-0131.pdf
(1.23 MiB) Downloaded 106 times


A few years back I received an e-mail for this webinar (web delivered seminar) 3D Printing Makes Lean Manufacturing Leaner. Below is the text of the e-mail:
This webinar will present an overview of 3D printing and how the technology helps manufacturing operations become leaner by eliminating wasted time, materials, space, and labor. Attendees will learn how 3D printing can reduce design-to-production cycle times through rapid and iterative prototyping, and how the broader spectrum of materials now available makes 3D printing a practical approach to many tooling applications as well as to producing replacement parts on demand. Attendees will also learn how manufacturing operations can take maximum advantage of these enhancements by establishing an in-house 3D printing capability. The presentation will explain how, as the costs of purchasing and using a 3D printing system continue to decline, the return on the investment of setting up an in-house capability has become greater and is realized sooner.
Documents available from this webinar include this whitepaper:
3d_printing_makes_lean_manufacturing_leaner (1).pdf
(466.56 KiB) Downloaded 104 times
and the pdf of the Powerpoint from the Webinar:
webinar_powerpoint.pdf
(340.88 KiB) Downloaded 184 times


"Six Sigma". The next four links contains interactive tutorials from Wisc-online.

As you view these, be sure to work through the calculations on your own.

What is Sigma? Why Six?
http://www.wisc-online.com/objects/inde ... ID=QLT1404

Six Sigma and the Cost of Quality
http://www.wisc-online.com/objects/inde ... ID=QLT1504

Six Sigma DMAIC Steps
http://www.wisc-online.com/objects/inde ... ID=QLT1304

Six Sigma Process Performance Analysis
http://www.wisc-online.com/objects/inde ... ID=QLT2204



Some related concepts presented in the wisc-online 6 Sigma tutorials:

Here's a brief presentation of Cp (Capability Process) and other statistical quantities related to 6 Sigma. Statical Process Control Glossary

Pareto Effect: http://en.wikipedia.org/wiki/Pareto_principle and http://management.about.com/cs/generalm ... 081202.htm.

Team Charter

Cause & Effect Diagram


Six Sigma Training & Certification.

For Homework due before next class: Work through each of the Wisc-Online links above on your own in addition to the time we spent in class. Also, do a bit of research and find the definitions of the acronyms "TIMWOODS" and "DOWNTIME" in relation to LEAN concepts. Are all of these concepts similar? When you have completed working through the assigned Wisc-Online links, post a Reply to this topic below stating you have completed the assignment.

Some added reading:
Who is Tim Woods and Why is he killing your business?"
The 8 Deadly Lean Wastes - DOWNTIME

Also think of an "Advanced Topic" or two you might want incorporated in our course this and I'll make a list next week.
jhgirouard2101
Posts: 64
Joined: Thu Sep 08, 2022 3:24 pm

Re: Week #1 & #2: Lean, Six Sigma, 5S & 6S

Post by jhgirouard2101 »

Went through the wisc links, and completed the rest of the assignment.
reespinoza2101
Posts: 29
Joined: Thu Sep 22, 2022 12:07 am

Re: Week #1 & #2: Lean, Six Sigma, 5S & 6S

Post by reespinoza2101 »

finished the wisc links, and completed the reading
jrvicenty2101
Posts: 66
Joined: Fri Sep 10, 2021 2:30 pm

Re: Week #1 & #2: Lean, Six Sigma, 5S & 6S

Post by jrvicenty2101 »

Completed Wisc-online links and the rest of the assignments.
rpoznyur2101
Posts: 66
Joined: Thu Sep 08, 2022 10:49 pm

Re: Week #1 & #2: Lean, Six Sigma, 5S & 6S

Post by rpoznyur2101 »

I have done the wisc links and have read the readings.
pagarcia2101
Posts: 64
Joined: Thu Sep 23, 2021 9:12 am

Re: Week #1 & #2: Lean, Six Sigma, 5S & 6S

Post by pagarcia2101 »

Completed the wisc links and the rest of the readings.
edmedina0001
Posts: 54
Joined: Fri Sep 16, 2022 5:19 pm

Re: Week #1 & #2: Lean, Six Sigma, 5S & 6S

Post by edmedina0001 »

I have went through the Wisc-links and did the readings as well.
vaseleznev2001
Posts: 60
Joined: Tue Nov 09, 2021 9:12 am

Re: Week #1 & #2: Lean, Six Sigma, 5S & 6S

Post by vaseleznev2001 »

I completed all the readings and visited the links
rjstrange2101
Posts: 49
Joined: Fri Sep 09, 2022 12:30 am

Re: Week #1 & #2: Lean, Six Sigma, 5S & 6S

Post by rjstrange2101 »

I have completed all of the readings and the links
Post Reply

Return to “EET-255 Advanced Topics in E.E.T./Automation”