Week #10 (3/27-31): StampWorks Experiments - Week #3

Post Reply
rjagodowski
Posts: 2393
Joined: Fri Sep 04, 2015 6:59 pm

Week #10 (3/27-31): StampWorks Experiments - Week #3

Post by rjagodowski »

As you complete the experiments below, you should create a post which lists which experiments you completed. As a reference, by the end of Week #11 you should have completed the first 9 StampWorks Experiments listed below through Experiment #18.


You MUST demonstrate at least one of your completed experiments to your instructor each time you are in the lab or you will not receive credit for your posts. I will then verify your post with an edit added to your post with a statement similar to "Verified 3/29/22 by RJ"


Stampworks lab information and assignments were originally posted here in Week #7.


The assignments have been copied again below for your convenience:

The Stampworks Manual can be downloaded here.

The BS2 programs for all of the StampWorks Experiments are contained in this zip file:
27297-StampWorks-Source-v2.1.zip
(75.1 KiB) Downloaded 226 times
You will notice that the list below begins with Experiments #26 & #27, then back to Experiment #10. It is advised you perform these Experiments in this order.

The required experiments in the StampWorks Manual are:

Experiment #26: Hobby Servo Motor Control
Experiment #27: Stepper Motor Control
Experiment #10: A Digital Clock
Experiments #11, 12 & 13: Using an LCD Display
Experiment #16: Frequency Measurement
Experiment #17: Advanced Frequency Measurement
Experiment #18: A Light Controlled Theremin
Experiment #21: Analog Input with PULSIN
Experiment #22: Analog Output with PWM
Experiment #28: Voltage Measurement

Additional Experiments (Extra-Credit) are:
Experiment #31: Advanced 7-Segment Multiplexing*
Experiment #32: I2C Communications*
Experiment #33: Using A Real-Time Clock

*These Experiments require external parts not contained within the StampWorks Board Inventory. See your instructor for these components.

There will be a few other additional BS2 activities to perform, such as: using the PING Ultrasonic Sensor, a 4x4 KeyPad and, if not already completed, viewing BS2 I/O signals on the Agilent Digital Scopes, to name a few.
Jbraco0001
Posts: 44
Joined: Fri Sep 06, 2019 9:43 am

Re: Week #10 (3/27-31): StampWorks Experiments - Week #3

Post by Jbraco0001 »

I completed experiment 16 and 17
Attachments
scope_63.png
scope_63.png (27.75 KiB) Viewed 2343 times
jhgirouard2101
Posts: 62
Joined: Thu Sep 08, 2022 3:24 pm

Re: Week #10 (3/27-31): StampWorks Experiments - Week #3

Post by jhgirouard2101 »

Completed #16 and #17
Attachments
IMG_0197 (1).jpg
IMG_0197 (1).jpg (3.04 MiB) Viewed 2342 times
IMG_0198.jpg
IMG_0198.jpg (2.68 MiB) Viewed 2342 times
scope_0.png
scope_0.png (28.86 KiB) Viewed 2342 times
scope_63 copy.png
scope_63 copy.png (27.75 KiB) Viewed 2342 times
rpoznyur2101
Posts: 65
Joined: Thu Sep 08, 2022 10:49 pm

Re: Week #10 (3/27-31): StampWorks Experiments - Week #3

Post by rpoznyur2101 »

Week 10 Lab
Attachments
IMG-6583.jpg
IMG-6583.jpg (1.7 MiB) Viewed 2330 times
IMG-6582.jpg
IMG-6582.jpg (1.5 MiB) Viewed 2330 times
jrvicenty2101
Posts: 65
Joined: Fri Sep 10, 2021 2:30 pm

Re: Week #10 (3/27-31): StampWorks Experiments - Week #3

Post by jrvicenty2101 »

I completed Experiments # 16, 17, 18
Attachments
eet250_week_10_ex_16.png
eet250_week_10_ex_16.png (22.75 KiB) Viewed 2327 times
eet250_week_10_ex_17.png
eet250_week_10_ex_17.png (23.24 KiB) Viewed 2327 times
eet250_week_10_ex_18.png
eet250_week_10_ex_18.png (43.71 KiB) Viewed 2327 times
pagarcia2101
Posts: 63
Joined: Thu Sep 23, 2021 9:12 am

Re: Week #10 (3/27-31): StampWorks Experiments - Week #3

Post by pagarcia2101 »

Paula Garcia Completed experiment 16&17 with Riley S.
vaseleznev2001
Posts: 59
Joined: Tue Nov 09, 2021 9:12 am

Re: Week #10 (3/27-31): StampWorks Experiments - Week #3

Post by vaseleznev2001 »

Vlad Seleznev
Attachments
IMG-6582.jpg
IMG-6582.jpg (1.5 MiB) Viewed 2230 times
IMG-6583.jpg
IMG-6583.jpg (1.7 MiB) Viewed 2230 times
hnle
Posts: 54
Joined: Mon Sep 12, 2022 6:29 pm

Re: Week #10 (3/27-31): StampWorks Experiments - Week #3

Post by hnle »

Done #16, #17
Post Reply

Return to “EET-260 Lab”