Week #11 (4/3-7): StampWorks Experiments - Week #4

Post Reply
rjagodowski
Posts: 2393
Joined: Fri Sep 04, 2015 6:59 pm

Week #11 (4/3-7): StampWorks Experiments - Week #4

Post by rjagodowski »

This is should be your fourth week working on the StampWorks Experiments. By this time you should have completed all of the regular experiments. If not, continue working. If you have finished them, you can attempt the extra-credit experiments.

After that, there are a couple of other experiments to be done using your regular Board of Education (StampWorks board not required). These experiments will investigating the PING Ultrasonic Sensor for several experiments and a 4x4 keypad interface.


You MUST demonstrate at least one of your completed experiments to your instructor each time you are in the lab or you will not receive credit for your posts. I will then verify your post with an edit added to your post with a statement similar to "Verified 3/29/22 by RJ"


Stampworks lab information and assignments were originally posted here in Week #7.


The assignments have been copied again below for your convenience:

The Stampworks Manual can be downloaded here.

The BS2 programs for all of the StampWorks Experiments are contained in this zip file:
27297-StampWorks-Source-v2.1.zip
(75.1 KiB) Downloaded 223 times
You will notice that the list below begins with Experiments #26 & #27, then back to Experiment #10. It is advised you perform these Experiments in this order.

The required experiments in the StampWorks Manual are:

Experiment #26: Hobby Servo Motor Control
Experiment #27: Stepper Motor Control
Experiment #10: A Digital Clock
Experiments #11, 12 & 13: Using an LCD Display
Experiment #16: Frequency Measurement
Experiment #17: Advanced Frequency Measurement
Experiment #18: A Light Controlled Theremin
Experiment #21: Analog Input with PULSIN
Experiment #22: Analog Output with PWM
Experiment #28: Voltage Measurement

Additional Experiments (Extra-Credit) are:
Experiment #31: Advanced 7-Segment Multiplexing*
Experiment #32: I2C Communications*
Experiment #33: Using A Real-Time Clock

*These Experiments require external parts not contained within the StampWorks Board Inventory. See your instructor for these components.
kjchampoux2001
Posts: 36
Joined: Tue Jan 31, 2023 8:28 pm

Re: Week #11 (4/3-7): StampWorks Experiments - Week #4

Post by kjchampoux2001 »

Finished Experiments 16,17, and 18
Attachments
scope_1.png
scope_1.png (24.65 KiB) Viewed 2981 times
scope_2.png
scope_2.png (25.17 KiB) Viewed 2981 times
scope_3.png
scope_3.png (37.36 KiB) Viewed 2981 times
etjameson2001
Posts: 45
Joined: Sun Oct 11, 2020 5:57 pm

Re: Week #11 (4/3-7): StampWorks Experiments - Week #4

Post by etjameson2001 »

4/6/2023
Ch16-CH18
Attachments
scope_1.png
scope_1.png (24.65 KiB) Viewed 2981 times
scope_2.png
scope_2.png (25.17 KiB) Viewed 2981 times
scope_3.png
scope_3.png (37.36 KiB) Viewed 2981 times
Jbraco0001
Posts: 44
Joined: Fri Sep 06, 2019 9:43 am

Re: Week #11 (4/3-7): StampWorks Experiments - Week #4

Post by Jbraco0001 »

finished experiments 18 and 19
jhgirouard2101
Posts: 62
Joined: Thu Sep 08, 2022 3:24 pm

Re: Week #11 (4/3-7): StampWorks Experiments - Week #4

Post by jhgirouard2101 »

Finished #18 and did #19 which wasn't required, Rick heard the noises from the experiment.
rpoznyur2101
Posts: 65
Joined: Thu Sep 08, 2022 10:49 pm

Re: Week #11 (4/3-7): StampWorks Experiments - Week #4

Post by rpoznyur2101 »

Finished Experiments 18 and 19
pagarcia2101
Posts: 63
Joined: Thu Sep 23, 2021 9:12 am

Re: Week #11 (4/3-7): StampWorks Experiments - Week #4

Post by pagarcia2101 »

Paula Garcia Completed experiments #18 & #21 with Vincent
vaseleznev2001
Posts: 59
Joined: Tue Nov 09, 2021 9:12 am

Re: Week #11 (4/3-7): StampWorks Experiments - Week #4

Post by vaseleznev2001 »

We did both experiments 18 and 19.
hnle
Posts: 54
Joined: Mon Sep 12, 2022 6:29 pm

Re: Week #11 (4/3-7): StampWorks Experiments - Week #4

Post by hnle »

Done #18 and #21 with Paula
Post Reply

Return to “EET-260 Lab”