Week #6 (2/27-3/3) Weekly Progress Report

Locked
rjagodowski
Posts: 2362
Joined: Fri Sep 04, 2015 6:59 pm

Week #6 (2/27-3/3) Weekly Progress Report

Post by rjagodowski »

Post your progress, contributions, work and anything else you did for the Team project here.

There will be a separate Topic for each week during the semester.

These are individual posts, so each member must post their own progress report. If you worked with others, or the entire group, then you can mention that in your post as well. But each member must post to receive credit for this week's post.
Jbraco0001
Posts: 45
Joined: Fri Sep 06, 2019 9:43 am

Re: Week #6 (2/27-3/3) Weekly Progress Report

Post by Jbraco0001 »

Made good progress on the plc with Greyton and Rigo. I also helped cut some wood and pvc for the golf ball hopper and ramp.
reespinoza2101
Posts: 29
Joined: Thu Sep 22, 2022 12:07 am

Re: Week #6 (2/27-3/3) Weekly Progress Report

Post by reespinoza2101 »

we made more progress on the plc with Greyton and Joe. I also talked with Vlad about our idea for the ramp height.
jhgirouard2101
Posts: 64
Joined: Thu Sep 08, 2022 3:24 pm

Re: Week #6 (2/27-3/3) Weekly Progress Report

Post by jhgirouard2101 »

We cut the PVC piping and epoxied it together, ordered some more vibrators for the hopper.
rpoznyur2101
Posts: 66
Joined: Thu Sep 08, 2022 10:49 pm

Re: Week #6 (2/27-3/3) Weekly Progress Report

Post by rpoznyur2101 »

This week consisted of some more planning along the way, Greyyton, Rigo and Joe continued with the PLC's, Vlad continued working with the stepper motors. Jake were making the hopper for the balls. I continued with the woodwork
Locked

Return to “Progress Reports for Golfball Group”