Week #15 (5/1-5) Weekly Progress Report

[rjagodowski]

Post your progress, contributions, work and anything else you did for the Team project here.

There will be a separate Topic for each week during the semester.

These are individual posts, so each member must post their own progress report. If you worked with others, or the entire group, then you can mention that in your post as well. But each member must post to receive credit for this week's post.

[jhgirouard2101]

This week we worked on mounting the final parts of the hopper/ ball dispenser. We tested different angles and got one that worked the best. Joe and I drilled into the PVC pipes and put some screws to hold them together. While putting it back on the table, we spilled most of the PVC primer which smelt fantastic. We also did some more PLC/sensor testing, Vlad did some more 3D work, and Ruvim helped us with any wood work.

[rpoznyur2101]

This week went pretty well. Joe and Greyyton are working on the PLC and we see how it started to work with the conveyor, Jake continued improving the pvc system as well as cleaned up the area. Vlad made the spinning servo motor mechanism work with the pvc. Rigo helped with the assembly of the spinning mechanism. I did some woodwork for the project.

[Jbraco0001]

soldered the connection pins for the fanuc robot