Make sure you put a description under each of your pictures describing the conditions of the screenshot. For Example: Inverter, AND Gate with Switch = 0, AND Gate with Switch = 1, etc.
Here is the Whiteboard pic from the 2020 Fall lab class (Just look at the Red Marker showing the TTL signals. Ignore the stuff about op-amps and comparators.):
- The TTL Logic Gate Operation with Pulse Signals is on the left of this pic.
- White Board Pic_Op-Amp1_2020-1112_IMG_2183.jpg (2.27 MiB) Viewed 2954 times