Week #6: BS2 I/O Signals

[rjagodowski]

At this point, you should have completed all of the exercises and you are expected to know all of the content presented in the WAM text.

This week you should be performing the experiment to investigate the Input/Output Signals used by the BS2. A printed copy will be available in the lab. The pdf of the lab is attached here:

I_O BS2 Signal Viewing Lab v16.1.pdf

(110.29 KiB) Downloaded 275 times

This experiment requires the use of components and equipment here at STCC so this lab must be completed on campus. You will use the Agilent Digital Oscilloscope to take screen shots of the various parts of this lab.

The documents below are provided for support for the lab. They are taken from the Basic Stamp Syntax and Reference Manual. You should READ THEM before performing the experiment.

[ajgomez2201]

IMG_4878.jpeg (2.84 MiB) Viewed 182 times

IMG_4877.jpeg (2.91 MiB) Viewed 182 times

IMG_4876.jpeg (2.77 MiB) Viewed 182 times

IMG_4875.jpeg (2.97 MiB) Viewed 182 times

IMG_4874.jpeg (1.68 MiB) Viewed 182 times

IMG_4873.jpeg (1.72 MiB) Viewed 182 times

IMG_4872.jpeg (2.4 MiB) Viewed 182 times

IMG_4871.jpeg (2.5 MiB) Viewed 182 times

[krboutin2201]

[cfbrunelle2001]

1. HIGH/LOW/PAUSE
2. PULSOUT
3. PULSIN
4 RCTIME
5. FREQOUT

[crivera0001]

Week 6

[jmjohnson2101]

Completed the assignment. Here are the screenshots.

[ejleduc]

Eric Leduc