Week #10 (3/25-29): StampWorks Experiments - Week #3

[rjagodowski]

As you complete the experiments below, you should create a post which lists which experiments you completed. As a reference, by the end of Week #11 you should have completed the first 9 StampWorks Experiments listed below through Experiment #18.


You MUST demonstrate at least one of your completed experiments to your instructor each time you are in the lab or you will not receive credit for your posts. I will then verify your post with an edit added to your post with a statement similar to "Verified 3/29/22 by RJ"

Stampworks lab information and assignments were originally posted here in Week #7.


The assignments have been copied again below for your convenience:

The Stampworks Manual can be downloaded here.

The BS2 programs for all of the StampWorks Experiments are contained in this zip file:

27297-StampWorks-Source-v2.1.zip

(75.1 KiB) Downloaded 231 times

You will notice that the list below begins with Experiments #26 & #27, then back to Experiment #10. It is advised you perform these Experiments in this order.

The required experiments in the StampWorks Manual are:

Experiment #26: Hobby Servo Motor Control
Experiment #27: Stepper Motor Control
Experiment #10: A Digital Clock
Experiments #11, 12 & 13: Using an LCD Display
Experiment #16: Frequency Measurement
Experiment #17: Advanced Frequency Measurement
Experiment #18: A Light Controlled Theremin
Experiment #21: Analog Input with PULSIN
Experiment #22: Analog Output with PWM
Experiment #28: Voltage Measurement

Additional Experiments (Extra-Credit) are:
Experiment #31: Advanced 7-Segment Multiplexing*
Experiment #32: I2C Communications*
Experiment #33: Using A Real-Time Clock

*These Experiments require external parts not contained within the StampWorks Board Inventory. See your instructor for these components.

There will be a few other additional BS2 activities to perform, such as: using the PING Ultrasonic Sensor, a 4x4 KeyPad and, if not already completed, viewing BS2 I/O signals on the Agilent Digital Scopes, to name a few.

[crivera0001]

completed experiment 10

[ajgomez2201]

Completed EX 26 27 and 10. All have been reviewed waiting on instructor comments

[smfrechette2201]

I completed experiments 16 and 17

[ejleduc]

Completed experiment 10