Week #10 (3/25-29): StampWorks Experiments - Week #3

Post Reply
rjagodowski
Posts: 2393
Joined: Fri Sep 04, 2015 6:59 pm

Week #10 (3/25-29): StampWorks Experiments - Week #3

Post by rjagodowski »

As you complete the experiments below, you should create a post which lists which experiments you completed. As a reference, by the end of Week #11 you should have completed the first 9 StampWorks Experiments listed below through Experiment #18.


You MUST demonstrate at least one of your completed experiments to your instructor each time you are in the lab or you will not receive credit for your posts. I will then verify your post with an edit added to your post with a statement similar to "Verified 3/29/22 by RJ"


Stampworks lab information and assignments were originally posted here in Week #7.


The assignments have been copied again below for your convenience:

The Stampworks Manual can be downloaded here.

The BS2 programs for all of the StampWorks Experiments are contained in this zip file:
27297-StampWorks-Source-v2.1.zip
(75.1 KiB) Downloaded 248 times
You will notice that the list below begins with Experiments #26 & #27, then back to Experiment #10. It is advised you perform these Experiments in this order.

The required experiments in the StampWorks Manual are:

Experiment #26: Hobby Servo Motor Control
Experiment #27: Stepper Motor Control
Experiment #10: A Digital Clock
Experiments #11, 12 & 13: Using an LCD Display
Experiment #16: Frequency Measurement
Experiment #17: Advanced Frequency Measurement
Experiment #18: A Light Controlled Theremin
Experiment #21: Analog Input with PULSIN
Experiment #22: Analog Output with PWM
Experiment #28: Voltage Measurement

Additional Experiments (Extra-Credit) are:
Experiment #31: Advanced 7-Segment Multiplexing*
Experiment #32: I2C Communications*
Experiment #33: Using A Real-Time Clock

*These Experiments require external parts not contained within the StampWorks Board Inventory. See your instructor for these components.

There will be a few other additional BS2 activities to perform, such as: using the PING Ultrasonic Sensor, a 4x4 KeyPad and, if not already completed, viewing BS2 I/O signals on the Agilent Digital Scopes, to name a few.
crivera0001
Posts: 56
Joined: Mon Feb 20, 2023 8:48 am

Re: Week #10 (3/25-29): StampWorks Experiments - Week #3

Post by crivera0001 »

completed experiment 10
ajgomez2201
Posts: 58
Joined: Tue Sep 19, 2023 8:32 am

Re: Week #10 (3/25-29): StampWorks Experiments - Week #3

Post by ajgomez2201 »

Completed EX 26 27 and 10. All have been reviewed waiting on instructor comments
smfrechette2201
Posts: 61
Joined: Sun Nov 26, 2023 2:55 pm

Re: Week #10 (3/25-29): StampWorks Experiments - Week #3

Post by smfrechette2201 »

I completed experiments 16 and 17
ejleduc
Posts: 46
Joined: Mon Sep 13, 2021 11:14 am

Re: Week #10 (3/25-29): StampWorks Experiments - Week #3

Post by ejleduc »

Completed experiment 10
cfbrunelle2001
Posts: 53
Joined: Tue Dec 19, 2023 12:31 pm

Re: Week #10 (3/25-29): StampWorks Experiments - Week #3

Post by cfbrunelle2001 »

Completed experiments 26,27, 10
a_cotto
Posts: 55
Joined: Wed Nov 08, 2023 11:56 am

Re: Week #10 (3/25-29): StampWorks Experiments - Week #3

Post by a_cotto »

completed experiment 10
Post Reply

Return to “EET-260 Lab”