Fanuc Information - Check each Reply for a Different Topic

Post Reply
rjagodowski
Posts: 2393
Joined: Fri Sep 04, 2015 6:59 pm

Fanuc Information - Check each Reply for a Different Topic

Post by rjagodowski »

This is the manual for the LR Mate Educational Training Carts.

The complete, combined document:
MARM1CERT06121E-RevA.pdf
Entire document.
(1.79 MiB) Downloaded 172 times
Or in two parts, which makes it easier to staple.
Part 1 Ch. 1-7_MARM1CERT06121E-RevA.pdf
Document split to allow easier printing & stapling.
(2.17 MiB) Downloaded 160 times
Part 2 Ch. 7-10_MARM1CERT06121E-RevA.pdf
Document split to allow easier printing & stapling.
(1.27 MiB) Downloaded 157 times



Battery Changing Information:

Note that when changing the Fanuc LR200 batteries, depending upon how far the batteries have discharged and whether or not the proper procedure is followed might require Mastering the robot (restore the motor encoder data). The batteries should be replaced every year. The mastering info for the 3 LR Mate 200iD/4S robots is attached below along with the Quick Mastering Procedure. If the DCS (Dual Check Safety) Parameters need to be reset, the information is attached as well.
Fanuc Battery Replacement Instructions.pdf
(72.74 KiB) Downloaded 77 times
Fanuc LR Mate 200iD_4S Mastering Data.pdf
(502.46 KiB) Downloaded 95 times
Fanuc Quick Mastering Procedure (PDF).pdf
(6.23 MiB) Downloaded 82 times

Some additional documents about the conveyor:
Fenceless conveyor schematic.pdf
(136.42 KiB) Downloaded 77 times
Fenceless Conveyor Settings.pdf
(225.43 KiB) Downloaded 79 times
rjagodowski
Posts: 2393
Joined: Fri Sep 04, 2015 6:59 pm

Frames

Post by rjagodowski »

Frames:

What Is a Frame?

Coordinate System Frames in Industrial Robots from James Madison University


Coordinate Frames from James Madison U. This is a pretty good presentation of Coordinate Frames, but the last two pages get pretty deep, so you might wish to skip those. Here's the pdf if you prefer:
Coordinate Frames.pdf
(2.23 MiB) Downloaded 176 times



This Fanuc Robot User Guide from University of Ljubljana seems to have some nice visuals as to the coordinate system frame and robot motion. A pdf is attached here:
Fanuc Robot User Guide.pdf
(641.71 KiB) Downloaded 160 times

Some Videos from YouTube.com:
World Mode Tutorial from Ivy Tech Community College
Fanuc Robotics Presentation on Frames (19:38)
Tool Frames (9:12)
Establishing a Tool Frame using the 3-point Method (19:26)
User Frames (19:07)
Fanuc CERT Video on User Frames (38:28)
rjagodowski
Posts: 2393
Joined: Fri Sep 04, 2015 6:59 pm

M1iA Delta Robot

Post by rjagodowski »

Here's the link to the Fanuc site for the M1iA series of robots. There are several videos and support links on this page as well.
rjagodowski
Posts: 2393
Joined: Fri Sep 04, 2015 6:59 pm

Fanuc Re-Image Files & Process

Post by rjagodowski »

These are the image files for the three LR200 robots in our lab. They are labelled by the "F" number on each robot base. You need to download the proper image, unzip it and then copy the files over to an appropriate USB flashdrive.

Here is a video on the Fanuc Restore Procedure (6:09).

Here's a link to information about backing up and restoring images on the Fanuc RB-30iB Controller.


Here is a "Robot-Forum.com" post about the Fanuc Image & MD Backup Procedure.

Here is a "Robot-Forum.com" post about the Fanuc Image & Backups Problems
Attachments
F240427.zip
(45.62 MiB) Downloaded 6 times
F240429.zip
(45.52 MiB) Downloaded 6 times
F240428.zip
(45.46 MiB) Downloaded 9 times
Post Reply

Return to “Information for All Students”