Week #15 (4/29-5/3): Progress Reports

Post Reply
rjagodowski
Posts: 2393
Joined: Fri Sep 04, 2015 6:59 pm

Week #15 (4/29-5/3): Progress Reports

Post by rjagodowski »

Post your progress reports for Week #15 here.
Top
whenry0001
Posts: 52
Joined: Thu Dec 14, 2023 9:58 am

Re: Week #15 (4/29-5/3): Progress Reports

Post by whenry0001 »

Wired Fanuc, did not test. Made diagram
Untitled Diagram.drawio_onepage.pdf
(144.98 KiB) Downloaded 7 times
Top
a_cotto
Posts: 55
Joined: Wed Nov 08, 2023 11:56 am

Re: Week #15 (4/29-5/3): Progress Reports

Post by a_cotto »

purchased LED lights to make the vending machine pop out more.
3d printed a nozzle for the drinks
situated the nozzle and the hoses together and attached it to the wood structure
soldered the last air pump (we were limited on pumps and i didnt have much surface area to work with)
trimmed the bottles holding the snacks was noticing a problem with the food getting stuck and it seem to remedy the situation.
Last edited by a_cotto on Fri May 17, 2024 8:33 am, edited 1 time in total.
Top
smfrechette2201
Posts: 61
Joined: Sun Nov 26, 2023 2:55 pm

Re: Week #15 (4/29-5/3): Progress Reports

Post by smfrechette2201 »

I got the Fanuc to grab 2 cups and give them to the Dobot. Almost done with the program. I broke the claw again but fixed it.
Top
Post Reply

Return to “Progress Reports for Vending Group”